X10 PRO Receptacle Module, Both Outlets Controlled - XPXPR available from Home Controls

Welcome to Home Controls November 19, 2008

Home Theater & Entertainment | Home Wiring Systems | Environmental Controls | Tools & Instructional Material | Surplus Inventory

	Home • Products • Lighting & Appliance Control • Wall Receptacles • X10 PRO Receptacle Module, Both Outlets Controlled
	Wall Receptacles

X10 PRO Receptacle Module, Both Outlets Controlled
XPXPR
PRICE: $29.95
(XPXPR) X10 PRO Receptacle Module, Both Outlets Controlled

Click Here for Larger Image

Available In Ivory or White

QTY:

X10 PRO RECEPTACLE MODULE, BOTH OUTLETS CONTROLLED

X10 CONTROL OF OTHER RECEPTACLES

The XPR 20A Duplex Receptacle is used as a Remote Load Switching Module, which responds to X10 ON/OFF Commands from an X10 PRO Controller. Loads may be plugged into either one of the top/bottom receptacles or hard-wired from the Blue Switched Leg Wire to external loads or down-line receptacles.

Note: LOCAL CONTROL - The XPR Module can "Sense" if any load is plugged into it. When the load on/off switch is toggled to the On position, the Module responds by turning ON the load connected to it. Total load(s) must not exceed 20A.

USE X10 PRO PRODUCTS FOR RELIABLE PERFORMANCE

X10 Pro branded products are 100% compatible with X10 standards for home automation and control. They are built to meticulous standards to ensure years of worry-free operation. Each genuine X10 Pro product is extensively tested for durability and extended reliability.

X10 Pro 20A Duplex Receptacle Information Sheet (.pdf)