Buffalo Electronics J-Box Style IR Repeater/Receiver - BEIR250WI available from Home Controls

Welcome to Home Controls November 20, 2008

Home Theater & Entertainment | Home Wiring Systems | Environmental Controls | Tools & Instructional Material | Surplus Inventory

	Home • Products • Manufacturers • Buffalo Electronics • Buffalo Electronics J-Box Style IR Repeater/Receiver
	Buffalo Electronics

Buffalo Electronics J-Box Style IR Repeater/Receiver
BEIR250WI
PRICE: $29.95
(BEIR250WI) Buffalo Electronics J-Box Style IR Repeater/Receiver

Click For Larger Image

QUANTITY:

Buffalo Electronics IR Connecting Block and Power Supply
BEIR100
PRICE: $34.95

Buffalo Electronics Tube Style IR Repeater/Receiver
BEIR350
PRICE: $29.95

Buffalo Electronics Infrared Flasher/Emitter
BEIRE1
PRICE: $6.95

BUFFALO ELECTRONICS REGULATED IR REPEATER FOR J-BOX

NEED SOME ROOM FOR THAT WIRING?

Using this 1/2 inch deep, slim-line repeater is one easy way to make your wiring job a little easier.

This beautiful, ultra-thin, high-performance voltage regulated IR Repeater installs easily in any standard electrical box or P-ring. Utilizing surface mount technology for superb noise immunity, low current draw and reliability, the BEIR250 incorporates voltage regulation for consistent sensitivity and power supply noise immunity. Its range in ambient light is 40' with an acceptance angle of 130 degrees. This unit connects up to the BEIR100 IR Connecting Block.

INTELLIGENT MINDS, FRESH CONCEPTS

Each Buffalo Electronics infrared product was designed by their own engineering department and is a fresh new concept in infrared control. BEI has taken the most popular audio / video control system in use today and updated it to a new level. BEI has created the easiest to use, most reliable, most elegant IR control systems on the market.

Check out these additional products:

Buffalo Electronics IR Connecting Block
Buffalo Electronics Tube Style IR Repeater/Receiver

Buffalo Electronics J-Box Style IR Repeater/Receiver Data Sheet (.pdf)

Features:

State of the art circuit design assures high reliability and accurate IR data transmission
SMT for superb noise immunity, low power requirements and long term reliability
Voltage regulation for consistent sensitivity performance from room to room
Extensive shielding and special ground plane PCB design create robust noise immunity
Approximate range under normal conditions is 40 ft. with acceptance angle of 130 degrees
Connect up to 15 Imagine™ IR-250's with one block and one power supply
Terminal block connector easily accepts up to 16 gauge wire
Visible pin-light LED for IR signal confirmation
Requires only 1/2" J-box depth, need space for wires... this is your repeater
Built-in system ground for eliminating possible interference in noisy environments
Designed with the professional installer in mind
Color: Includes both White and Ivory
Wallplate not included