SIMPLY AUTOMATED INVERTING PHASE COUPLER, 30A OR 50A

WORKS WITH MIXED TECHNOLOGIES (UPB, X10, BROADBAND)

The Simply Automated Inverting Phase Coupler is designed to be plugged into a 220 VAC 3 prong power receptacle. This coupler can be installed in a 220VAC power receptacle, or between a 220VAC power receptacle and plug of a high power appliance, such as a clothes dryer, air conditioner or stove.

Note: The 30A Coupler is designed to be used with 30 Amp 220VAC 3 prong power receptacles. The 50A Coupler is designed to be used with 50 Amp 220VAC 3 prong power receptacles.

UNIVERSAL INVERTING PHASE COUPLERS BY SIMPLY AUTOMATED

Simply Automated Universal Inverting Phase Couplers are useful for coupling UPB (Universal Powerline Bus), as well as X10 and broadband signals, across two 120VAC power circuits in a split-phase residential installation. Typically one phase coupler is used per breaker panel in a home.

The inverting phase coupler is unique in the sense that it complements inverted UPB signals reflected back from large, street side, power transformers. The benefit is that each additional inverting phase coupler used adds signal strength between phases. This is not always the case for conventional phase couplers.

Simply Automated Inverting Phase Coupler Instruction Sheet (.pdf)
Simply Automated Inverting Phase Coupler Spec Sheet (.pdf)