SIMPLY AUTOMATED US1140 ULTRA-RELIABLE UPB DIMMER, 900 W, WHITE FACEPLATE

UPB DIMMER CONTROLLER WITH GLOSS WHITE SINGLE ROCKER FACEPLATE

The SimplyBrilliant™ US1140 UPB Dimming Transceiver Switch, model US11-40, provides direct load control and or remote control of permanently-installed new or existing lighting fixtures, lamps and other electrical devices connected to UPB devices. Each unit has one rocker switch that directly controls a load up to 900W. Incandescent lamps can be turned ON or OFF, and can also be dimmed and brightened.

The US11-40 can be configured to turn other types of non-dimmable loads ON and OFF as well. The timer function can be used to automatically turn OFF loads, after a preset time, like bathroom fans or heat lamps. The switch may also act as a transmitter or receiver that can communicate with other UPB devices, either individually or collectively for lighting scenes.

SIMPLY AUTOMATED WITH UPSTART FOR WINDOWS

No home automation software is required to control UPB products. Basic programming functions are achieved using simple push buttons on the wall switches and modules. Advanced programming options require UPStart UPB Configuration Software. Click the link under the Specifications tab for the free software. UPStart is a Windows-based program that is used for configuring purposes only, and requires an Interface Module to connect to a PC in the home (SAUMC).

Ultra-Reliable UPB Dimmer, 900W, White Data Sheet (.pdf)

Ultra-Reliable UPB Dimmer, 900W, White, Instruction Guide (.pdf)

FEATURES:

• Every switch is a dimmer, a relay switch AND a transmitter depending on how you program it.
  
• Robust, trouble-free installation
  
• Easy to retrofit...no new wires
  
• Exceptional reliability and noise immunity
  
• High signal strength and low frequency means UPB can communicate over very long A/C wire runs over one mile in length
  
• UPB addressing system uses 250 Unit ID's and 250 Network ID's for a total of 62,500 unique network addresses...plus a secure network password!
  
• Reliable 2-Way digital communication. The transmitter sends a signal and listens to a response from the receiver. The transmitter will continue to re-transmit the signal up to 4 times until it recieves that response
  
• Super-fast command-to-action time...less than 1/3 of a second
  
• Can be used with other PLC systems such as X10 in the same house without interference
  
• Can be used for stand-alone scene lighting control, or with a central controller
  
• Supported by HAI Omni, Stargate, CommStar, ELK M1, Premise Home Control, HAL2000 and more
  
• Each device can be programmed to be part of up to 15 scenes without an intelligent controller
  
• 200 dimming steps and variable fade rate from instant-on to a fade rate of up to one hour
  
• The LED lights on the switches can be programmed to show a different color for a different load status, and a locally switched dimmer can be programmed to send a status report to the controller
  
• Shallow switch depth allows for easier J-box installation

• Power requirements: 120VAC +/- 10%, 60 Hz
• Max Load: 900W incandescent and magnetic low voltage
• Wiring Connections: 6" stranded pigtails, #16 AWG for power/load #20 AWG for multi-way travellers.
• Operating Temp: 30-120 deg F (0-50 deg C)
• Dimensions: 4.2H x 1.7W x 1.6D"
• Depth inside J-box 1.33"