GE QUIK BRIDGE LOOP RECEIVER

ENABLE WIRELESS SENSORS FOR ANY HARDWIRED ALARM PANEL

Now every security system can be wireless. The Quik Bridge Loop Receiver is compatible with the most common hardwire security systems, so it's easy to add GE security wireless intrusion, fire, or environmental sensors and convenient wireless keychain touchpad control when you want it.

The receiver adds up to 16 supervised wireless sensors and 45 unsupervised Keychain Touchpads to the hardwire system for convenient security system operation and light control. Enables users to arm and disarm a hardwired system remotely using a Keychain Touchpad. Also enables garage door operation with or without an existing control panel.

GE SECURITY WIRELESS SOLUTIONS

The GE8016 allows any hardwired panel to use wireless devices on eight of its hardwire zones. It is compatible with all Learn mode sensors. The open-collector outputs can be connected to a security panel zone input or to external relays to allow garage door control, initiate lighting scenes of UPB switches through the use of the SAUMI32W I/O module, or even trigger a voice dialer.

Check out these additional products:

GE Quik Bridge Keyfob
GE Security Systems and Accessories

GE Secuirty Quik Bridge Loop Receiver Install Manual (pdf)

• Color: White
• Dimensions: 4.125" wide, 5.25" high (plus 9.25: antennas), 1.0" deep
• Installation: wall mount
• Transmitter type: SAW
• Radio frequency: 319.5 and 433 MHz
• Add up to 16 supervised sensors and 45 unsupervised panic buttons or keychain touchpads