Price: $204.95

XANTECH MICRO LINK™ PLASMA/LCD/LED/CFL FRIENDLY IR RECEIVER

PEEP-HOLE STYLE MICRO LINK IR RECEIVER WITH EXTENDED RANGE

The Xantech Micro Link IR Receiver is a small peep-hole style infrared repeater assembly. The Micro Link IR Receiver is equipped with a 7-foot cable and a 3.5mm stereo mini plug, which is plugged directly into the "IR RCVR" jack on the connecting block, such as the models 789-44, CB60, and 791-44. The Micro Link IR Receiver is primarily intended for use in installations where the connecting block is within reach of its 7-foot cable – as when installing the Micro Link IR Receiver in a cabinet where the controlled equipment is behind closed doors.

ABOUT XANTECH

Since 1969 Xantech Corporation has designed, engineered and manufactured a multitude of innovative custom home control devices, from the IR receiver to high definition video distribution. Today Xantech continues to provide the products and technology needed to exceed the standards of even the most demanding custom home systems.

Micro Link Plasma/LCD/LED/CFL Friendly IR Receiver Spec Sheet (.pdf)

Features

• Small size; mounts in 1/2” diameter hole. 2 inches deep (50mm).
• Quick-Connect 3.5mm Stereo Mini Plug on 7ft. cable for direct plug-in to Xantech Connecting Blocks.
• Works in normal 3-wire mode (12VDC, IR, GND).
• Green Talkback LED for System Verification.

Specifications

• Infrared modulation frequency bandwidth: 25 – 60 kHz.
• IR reception range: Up to 120 feet, depending on remote control output strength and ambient conditions.
• Reception angle: 55 degrees off axis for 50% range reduction.
• Cable requirements: 3-conductor. Use 24 gauge up to 200’, 22 gauge up to 600’ 20 gauge up to 2000’, 18 gauge up to 5000’ – unshielded OK.
• Max. transmission length: 1 mile using 18 gauge wire.
• Maximum current output: 100mA
• Drives IR emitters through Xantech Connecting Blocks, Controllers, etc.
• Dimensions: 0.7” diameter x 2.2” deep (18mm x 56mm).
• Power requirements: +12VDC, 20mA.