|
|
|
|
Xantech IR Connecting Block
XA78944
Price: $34.95
|
|
|
|
|
 Product Description
|
XANTECH 1 ZONE 4 SOURCE CONNECTING BLOCK
CONNECTS WANTECH IR RECEIVERS TO 4 SINGLE OR DUAL EMITTERS
The Model 789-44 One Zone Four Source Connecting Block provides a quick low cost means of connecting Xantech IR receivers and keypads to four single or four dual emitters, with a power supply (not included), in an infrared repeater system. It can also provide emitter expansion for various Xantech devices
The 789-44 can be conveniently mounted to a wall or shelf by using the two sheet-metal screws supplied. The unit may be mounted in any orientation to accommodate the installation. |
|
Xantech One Zone Four Source Connecting Block Manual (.pdf)
Features: - Connects four emitter ports and power supply to all Xantech infrared receivers and keypads
- Four parallel emitter ports with 470-Ohm resistors drive four single or four dual emitters
- Quick-connect stereo mini jack for IR Receivers that use a stereo mini plug
- STATUS terminal for connection of IR Receivers and Keypads that have status LED’s
- 2.1 mm coaxial power jack
- Requires either the 781ERGPS or 782ERGPS power supply
- Dimensions: 3" x 1 3/4" x 13/16" (77mm x 45mm x 21mm)
- Power LED
Technical Specs: - Inputs: 1 - Screw type 4-terminal plug-in. 1 - IR Receiver "IR RCVR" 3.5mm stereo mini jack.
- Outputs: 4 - Emitter ports (3.5mm mono mini jacks) parallel driven.
- Contains a 470 Ohm resistor in series with each emitter output.
- Xantech 282, 283, 284 and 286 Mini Emitters may be used.
- Power requirements: 12 volts DC. Uses 781RG or 782-00 Power Supplies. Note: A power supply is not connected to the 789-44 when it is used as an emitter expander.
- 2.1 mm coaxial power jack.
- Dimensions: 2-15/16" W x 1-3/4" D x 13/16" H
|
|
|
|
|
|
|
|
