Price: $44.95

XANTECH CONTACT CLOSURE SENSOR MODULE

FOR USE WITH ISM4, MRC PLATFORM, AND CBCSM1 CONNECTING BLOCK

The SMCC01 sensor module detects dry switch/relay closure. Two wires form a dry switch or relay contacts can be connect to the screw terminals. When a switch or relay provides a 'short' between the two wires, the sensor module is 'on'. When the switch or relay provides an 'open' between the two wires, the sensor module is 'off'.

XANTECH SENSOR MODULES

The Xantech Sensor Module product line provides several sensing solutions for a wide variety of automation needs. Used in conjunction with Xantech's award winning MRC platform*, source management and control is easy and reliable. With the addition of Xantech's ISM4, the sensors help prevent system call backs. Also, the sensor modules can be used with the CBCSM1 connecting block to provide a simple interface solution. The CBCSM1 can provide positive and negative logic through its PULL UP and PULL DOWN connections.
(* MRC44, MRAUDIO4X4, MRC88, MRAUDIO8X8)

Each module comes with double-sided foam tape and mounting screws. Also, built into the sensor is a convenient LED light that turns 'on' to indicate the sensor is in an 'on' condition.

Sensor Module Information Sheet (.pdf)

Features

• Contact Closure Sensor Module
• Detects dry switch/relay closure
• Wired directly to dry switch or relay
• 0-15 second adjustable delay
• For use with ISM4, MRC platform and CBCSM1 connecting block

Specifications

• Delay: Adjustable between 0 and 15 seconds.
• +12VDC, <50mA.
• 1/8" (3.5mm) mini-plug, Tip: +12VDC, Ring: Signal, Sleeve: Ground.
• Sensor Module Dimensions: 3/4" W x 3 3/4" L x 3/4" H.
• Control Cable Length: Approx. 6 feet