|
|
|
X10 PRO Wireless Base Transceiver
XPPAT01
The X10 Pro RF Base Transceiver works with X10's line of RF Remote Controls and PIR Wireless Motion Sensors.
Price: Out of stock
|
|
 Product Description
|
This product is no longer available from X10 Pro.
Please contact Customer Service at 800-266-8765 for an alternative product.
X10 PRO WIRELESS BASE TRANSCEIVER MODULE, 16 CHANNEL
WORKS AS AN X10 SIGNAL CONVERTER
The X10 Pro RF Base Transceiver works with X10's line of RF Remote Controls and PIR Wireless Motion Sensors. The newly redesigned RF Base Transceiver Module works as an X10 Signal Converter as it receives all 16 Unit Code Addresses (1-16), on one House Code (A-P), via wireless RF Remotes. Wireless X10 Remotes need this Base Transceiver Module to catch the radio signals and convert them to X10 Signals on the electrical power lines. If the Transceiver Module detects X10 activity on the line, it holds off transmitting the Command until the line is clear.
Add as many Handheld Remotes and X10 Wireless Modules as you want within one House Code (A-P) to each Base Transceiver. Be careful to have only one RF Base Transceiver Module or X10 Security Console (which also converts RF Signals into X10 Signals for the electrical power line) per House Code. If more than one Base Transceiver Module is used on the same House Code, X10 Signal Collisions may result.
X10 PRO MAKES IT SIMPLE!
X10 Pro manufactures home automation products using X10 powerline carrier and wireless technologies. Now you can have complete automated control of lights and appliances from anywhere in your home with X10 Pro.
|
Specifications
|
|
X10 Pro RF Base Transceiver Spec Sheet (.pdf)
Specific Requirements:
- 120VAC
- Built-in Appliance Module - 15A, 1/3HP Rated, any load type will work, Incandescent or Inductive.
- NO DIMMING of built-in Outlet.
|
|
|
|
|
|
|
|
Why Automate
