Dry Contact Transmitter Base, Momentary - XPXPT3 available from Home Controls

Home >> Lighting and Appliance Control >> Wall Switches and Dimming >> X10 Devices >> X10 Pro Dry Contact Transmitter Base, Momentary

(XPXPT3) X10 Pro Dry Contact Transmitter Base, Momentary

X10 Pro Dry Contact Transmitter Base, Momentary
XPXPT3

The XPXPT3 Momentary Dry Contact Transmitter is a wall-mounted controller capable of transmitting from a...

Price: $89.95

Description
Specifications

X10 PRO DRY CONTACT TRANSMITTER, MOMENTARY

USE UP TO FOUR DRY CONTACTS TO SEND ON/OFF COMMANDS

The XPXPT3 Momentary Dry Contact Transmitter is a wall-mounted controller capable of transmitting from a standard, single gang wall box having a HOT and NEUTRAL.

The XPXPT3 also automatically monitors the power line for noise and other signal transmissions and will not transmit until the power line is clear.

AUTOMATE YOUR HOME WITH X10

X10 Pro manufactures home automation products using X10 powerline carrier and wireless technologies. Have complete automated control of lights and appliances from anywhere in your home with X10 Pro.

Single gang device

Requires HOT and NEUTRAL at switch location

Wiring Instructions

The Unit Code that is set will be the BLUE wire unit number transmitted. If all four contacts are used, use the next three wires sequentially, BROWN, GRAY, and YELLOW. The commands will be sent to the next three sequential addresses above the set Unit Code.

To send an ON command -

Use the RED wire (common +). When contacted to the BLUE, BROWN, GRAY, or YELLOW wire, one ON signal is transmitted. When the contact switch is released, no signal is transmitted.

To send an OFF command -

Use the ORANGE wire (common -). When contacted to the BLUE, BROWN, GRAY, or YELLOW wire, one OFF signal is transmitted. When the contact switch is released, no signal is transmitted.