X10 PRO LAMP MODULE, AGC or NON-AGC

HOME LIGHTING AT YOUR COMMAND!

The X10 Lamp Module is the simplest and most effective way to control your household incandescent lights. Lighting control is simply a plug-in away. The X10 Lamp Module plugs into any standard 120V household outlet and gives you the ability to remotely control any incandescent light you plug into the Module (up to 300 watts). The Lamp Module is actually a Receiver that Responds to X10 Signals generated by X10 Controllers elsewhere on the electrical power lines. Simply dial in any House Code and Unit Code you choose for each Module and away you go! Don't worry about losing manual control of the lamp... it will function normally even with the Module in place. The Lamp Module is the foundation of your home lighting system.

This Module is available with and without Automatic Gain Control (AGC).

The AGC Lamp Module incorporates an advanced X10 Powerline circuit design which allows the Module to operate in adverse environments. The principal advantage is better noise rejection. These Modules are recommended for all installations where reliability of operation is paramount.

The NON-AGC Lamp Module principal advantage is greater sensitivity to the X10 Command Signal in an installation where electronic interference is low. It takes approximately 3 seconds from Off to Full Bright and vice versa.

LIGHTING CONTROL IS A PLUG-IN AWAY

The Lamp Module is the foundation of your home lighting system. The X10 Pro Lamp Module is the simplest and most effective way to control your household lights. The X10 Lamp Module plugs into any standard 110v household outlet and gives you the ability to remotely control any incandescent light you plug into the module (up to 300 watts). The Lamp Module is actually a receiver that reacts to X10 signals generated by X10 transmitters elsewhere on the powerline. Simply dial in any house code and unit code you choose for each module and away you go! Don't worry about losing manual control of the lamp... it will function normally even with the module in place.

X10 Lamp Module Information Sheet (.pdf)