|
|
|
|
Monterey X10 Activated Pool/Spa Controller
MIPSC
|
|
|
|
|
|
 |
 Product Description
|
MONTEREY INSTRUMENTS X10 ACTIVATED POOL/SPA CONTROLLER
AUTOMATIC POOL AND SPA CONTROL WITH X10!
Now have complete control of your pool and spa functions - from your spa, your patio, inside your home, in your car, or anywhere in the world. Imagine driving home after a hard day at the office, dialing up your home to switch the pool valves from pool to spa, turn on the heater, or any other pool/spa function you would like to control! Or maybe you would like your home automation controller to tell your pool to backflush the system and turn on the pool cleaner every Friday morning at 6:00 a.m. Whatever you would like to do is a simple thing for this superior pool panel controller.
This X10 Pool and Spa Control has a pool mode and a spa mode. While in the Spa Mode, an X10 code activates a heat boost relay which turns ON the pool/spa heater for two minutes and then automatically turns it OFF. The controller automatically reverts back to Pool Mode after 1 to 16 hours (programmable).
The Pool/Spa controller can be used with a wide variety of X10 transmitters, such as desk-top controllers, telephone responders, and whole-home automation controllers (sold separately). Have the convenience of complete control of your pool and spa with X10 commands.
The pool and spa controller comes with one 24 VAC, 1000 mA Power Adapter, and one 6 ft. RJ-1 modular jack cord for power line interface.
NOTE: The power line interface, XPPSC05, is required and sold separately
|
|
Spa Mode: - A single X10 ON command activates your spa and performs the following:
1) Sends an X10 ON command to turn ON your filter pump,
2) Supplies 24 VAC to rotate the suction and return valve actuators (Compool or Jandy),
3) Energizes a heater relay to turn ON the pool/spa heater.
Pool Mode - A single X10 OFF command activates the Pool Mode and performs the following:
1) A filter pump cool-down period is initiated,
2) 24 VAC is supplied to rotate the suction and return valve actuators to the pool position
3) It de-energizes the pool/spa heater reaaly to turn OFF the heater.
|
|
|
|
|
|
|
|
