X10 230V Universal Computer Interface Module (prise française)
XPCM11F

X10 230V Universal Computer Interface Module (prise française) L'Universal Computer Interface est programmé à partir d'un Windows PC multimédia basée à contrôler la gamme complète des dispositifs compatibles X10.

Price: $31.07

• Stand alone operation: run scheduled events automatically even when unplugged from the PC.
• Easy to use Windows 3.1 and '95 compatible software supplied on CD ROM including multimedia product catalog.
• Controls timed events and macros - responds to a single function from a controller to automatically carry out a group of events.
• AAA Battery backup - scheduled events resume automatically after a power outage.
• Compatible with full range of X10 compatible home automation products.

L'Universal Computer Interface est programmé à partir d'un Windows PC multimédia basée à contrôler la gamme complète des dispositifs compatibles X10. Les fonctions comprennent les épreuves chronométrées et des macros - des groupes de commandes qui ont lieu d'une simple pression d'un bouton sur un contrôleur.

The Universal Computer Interface is programmed from a Windows based Multimedia PC to control the full range of X10 compatible devices. Functions include timed events and macros - groups of commands that take place with a single press of a button on a controller.

Works with the PC switched off: Once the interface has been programmed, the PC is no longer needed. Two standard AAA batteries retain the built-in time clock's accuracy. The macros are held in E2 and retained even if the power fails. You can even unplug the interface after programming it and plug it in elsewhere in the home.

Connections: The Computer Interface fits between the AC outlet and the computer's power plug. A grounded AC socket is provided on the front of the interface for the computer's power plug (3A max.). A cable with an RJ11 connection on one end and a 9-pin 'D' type connector on the other is provided to connect the Interface to the serial port of the PC.

Two-way: The Computer Interface is fully two-way, both generating and receiving X-10 powerline commands.

ActiveHome Software: User friendly Windows 3.1 and '95 compatible software is provided with the Interface which includes graphical representations of switches, modules etc. to provide point-and-click control of modules, and easy setting of scheduled events and macros.

Scheduled Events: Events may be scheduled to occur at a particular time every day, on chosen days only, between chosen dates etc. You can also program the interface to turn lights on at dawn and off at dusk just by choosing your location from a worldwide list.

Macros: A command from a controller (such as a mini controller) normally operates a device directly, e.g. pressing 'A1 ON' switches on the module with code A1. The computer interface, however, can be programmed to intercept a command, and respond to it by automatically generating a whole group of commands called a 'macro'. For example, pressing 'A1 ON' on a controller might turn on stair lights and bedroom lights, then after 20 minutes dim the bedroom lights to 50% and turn off the stair lights, and finally turn all lights off 30 minutes later.

Connections

• AC outlet on front of module for computer power cord
• RJ11 socket at base of module for serial connections

Specifications

• AC supply: 220VAC/50 Hz
• X-10 Powerline: 120KHz/2.5vp-p
• Backup battery: 2 x AAA cell
• Backup time: 1 Week typical
• Events/macros stored: 25 typical, 39 max (varies with mix of events and macros)

Plug type compatible in Belgium, Czech Republic, France, Slovakia, Andorra, Estonia, Latvia, Lithuania, Moldova, Monaco, Poland and Ukraine.