Price: $614.95

WILSON IN-BUILDING WIRELESS CELLULAR AMPLIFIER KIT, WIDE BAND ANTENNA

EVERYTHING YOU NEED IS IN THE BOX!

The Wilson In-Building Wireless Cellular Amplifier Kit works in any inside location where improved cellular signal is needed: homes, offices, buildings. It is compatible with multiple cell phones and data cards simultaneously. Power control logic ensures maximum output power is within cellular standards. This Amplifier kit works on all generations of CDMA, TDMA and GSM. FCC and IC type accepted.

Package Contents

• Wilson SIGNALBOOST DB Pro Cellular Signal Amplifier
• Wide Band Yagi Antenna
• Wall Mount Inside Panel Antenna
• 20' White RG6 Coax
• 30' White RG6 Coax
• 50' White RG6 Coax
• Installation Guide

Benefits

• Significantly improves voice and data quality
• Greatly reduces disconnects and drop-outs
• Multiple cell phones and data cards can be amplified simultaneously
• Significantly improves voice and data signal quality
• Increases data communication rates needed for 3G technologies
• Receives and transmits better than your cell phone
• Designed for use with standard TV cable common in many homes
• Extends cell phone battery life
• Easy to install and use, and it's affordable

IN-BUILDING WIRELESS AMPLIFIER SYSTEMS

Wilson's In-Building Wireless Amplifiers will work with any cell phone or cellular data card. They broadcast the improved signal into your home, office, building or warehouse through an inside antenna and improve signal quality in rural or remote locations as well as shadowed environments such as steel, concrete and brick buildings.

• Part Number: 841263
• Frequency: 824-894 MHz / 1850-1990 MHz
• Gain: 62 dB / 62 dB
• Max Output Power: 2.5 watts
• Max RF (up/down): 34 dBm / 15.7 dBm
• Noise Figure:3.5 dB nominal
• Flatness:±5 dB
• Isolation: > 90 dB
• Power Requirements: 120-240 V AC, 50-60 Hz, 8 W max
• Connectors: F-Female
• Dimensions:
  • 6.2 x 4.2 x 1.5 (inch)
  • 15.7 x 10.7 x 3.8 (cm)