|
|
|
Wilson Electronics Cell Signal Boost Kit
WI801247
This Wilson SignalBoost DT Amplifier works by picking up a stronger signal from an antenna mounted on a pole or wall outside your building or high...
Price: $263.31
|
|
 Product Description
|
SIGNALBOOST™ DT DUAL-BAND 800/1900 MHZ DESKTOP AMPLIFIER
MAINTAINS STRONG CELL SIGNAL
This Wilson SignalBoost DT Amplifier works by picking up a stronger signal from an antenna mounted on a pole or wall outside your building or high on a window inside your building, facing the cell site. The amplifier then increases the signal and transmits it through the on-board antenna on the amplifier to your cell phone or laptop data card. Anyone who uses a cell phone or cellular data card knows the frustration of not being able to connect to or maintain a strong cellular signal. When this occurs, it's generally due to one of two reasons:
1. Location of the Nearest Cell Tower – Cell towers are situated to provide broad coverage; however, there are many areas in which signal strength may be reduced by topographic features or by local government restrictions on the height or placement of the towers themselves. Rural areas generally have fewer cell towers than urban regions.
2. Natural and Man-made Obstructions – Signal strength can also be negatively affected by trees, hills, buildings and other obstructions. You may be relatively close to a cell tower but still unable to make a call. This often occurs in homes, offices and other buildings in which stucco, concrete or metal walls block the signal.
The SignalBoost DT works with two antennas (included). The on-board antenna communicates with your cell phone or laptop data card, and the cradle antenna communicates with the cell tower. The cradle antenna is designed for installation outside on a wall or a pole, or inside on a window or wall, depending on your preferred configuration The cradle antenna receives the outside signal and sends it through the coax cable to the SignalBoost DT, where it is amplified and retransmitted much more strongly through the on-board antenna into the room. When the on-board antenna picks up a signal from your cell phone or data card, the amplifier boosts that signal and transmits it through the cable to the cradle antenna and back to the cell site. (Note: the SignalBoost DT will only operate if there is adequate signal to amplify.)
|
Specifications
|
|
SIGNALBOOST™ DT Dual-Band 800/1900 MHz Desktop Amplifier Install Guide (.pdf)
Features
• Complete package - everything you need is in the box
• Wireless operation - no connection to cell phone or data card
• Works in any inside location where improved cellular signal is needed: homes, offices, buildings
• Power control logic ensures maximum output power is within cellular standards
• Works on all generations of CDMA, TDMA and GSM
• FCC and IC type accepted Benefits
• Greatly reduces disconnects and drop-outs
• Multiple cell phones and data cards can be amplified simultaneously
• Significantly improves voice and data signal quality
• Increases data communication rates needed for 3G technologies
• Receives and transmits better than your cell phone
• Extends cell phone battery life
• Easy to install and use, and it's affordable
Package Contents
• Wilson SIGNALBOOST™ DT Cellular Signal Amplifier
• Outdoor / Window Directional 5 dB Cradle Antenna
• Omni-Directional Inside Antenna
• Two lengths RG6 Cable, 20' and 30'
• All Mounting Hardware
• AC Power Supply Specifications Part Number: | 801247 | Frequency: | 824-894 MHz / 1850-1990 MHz | Gain: | 50 dB / 50 dB | Linear Output Power: | +30 dBm | Max Output Power: | +35 dBm | Noise Figure:
| 3.5 dB nominal | Flatness:
| ± 2 dB / ± 2 dB | Isolation: | > 90 dB | Power Requirements: | 110-240 V AC, 50-60 Hz, 0.6 A max | Connectors: | TNC Female / F-Female | Dimensions: | 6.2 x 4.2 x 1.5 (inches)
15.7 x 10.7 x 3.8 (cm) | Weight: | 0.64 lbs / 0.29 kg |
|
|
|
|
|
|
|
|
Why Automate
