Price: $354.95

WILSON ELECTRONICS WIRELESS MOBILE AMPLIFIER KIT

SAY GOODBYE TO DROPPED CALLS

This Wilson Electronics Mobile Wireless Dual-Band Cellular / PCS Amplifier has been carefully engineered to significantly improve the performance of your cell phone or cellular data card in mobile applications. Together with an outside antenna (included), the amplifier’s state-of-the-art technology is designed to increase your signal up to 10 times, reduce disconnects and dropouts, and increase data communication rates needed for 3G technologies.

The outside antenna will collect the cell tower signal and send it through the cable to the amplifier. The signal is then boosted and sent through the inside antenna. Your cell phone or data card then communicates with the improved signal. When the cell phone or data card transmits, the signal goes through the inside antenna, is boosted by the amplifier and broadcast back to the cell tower through the outside antenna.

Wilson Electronics manufactures a wide variety of antennas to help you customize your amplifier for your specific application.

• Allows multiple phones and data cards to be used simultaneously
• Supports CDMA, TDMA, GSM and AMPS, in addition to 1x and 3x data protocols such as HSDPA, EVDO and EDGE
• Up to 3 watts maximum output power
• Power control logic ensures maximum output power is within cellular standards
• Requires no physical connection to cell phone or data card
• Provides high signal-to-noise ratio
• protects cell sites from harmful interference
• Includes our high efficiency 12" exterior magnet mount antenna (301103)
• Dual band - Cellular and PCS
• FCC and IC type accepted

NOTE: Use of this amplifier with an antenna gain higher than 6.12 dBi is in violation of FCC regulations for which the offender is fully liable. All Wilson mobile antennas are 6.12 dBi or less.

Kit includes:

• Wireless Mobile Amplifier
• DC Plug-in Power Supply
• Low-profile Interior Antenna
• 12" Magnet Mount Exterior Antenna

WILSON ELECTRONICS

Wilson Electronics, Inc. has been a leader in the wireless communications industry for nearly 40 years. The company designs and manufactures amplifiers, antennas and related components that significantly improve cellular telephone signal reception and transmission in a wide variety of applications, both mobile and in-building.

Wilson Dual Band Mobile Wireless Ampllifier Kit Installation Guide (.pdf)

• Frequency: 824-894 MHz / 1850-1990 MHz
• Gain: 40 dB / 45 dB
• Max Output Power: 3 watts
• Max RF: +35 dBm / +10 dBm
• Noise Figure: 3 dB nominal
• Flatness: ± 3 dB / ± 4 dB
• Isolation: > 90 dB
• Power Req’s: 6 V, 3 A max
• Connectors: FME-Male 50 ohms
• Dimensions: 4.5" x 3.5" x 1.25" / 11.43 x 8.9 x 3.2 (cm)
• Weight: 1.5 lbs / 0.7 kg