|
|
|
|
Wilson Direct Connection Cellular/PCS GSM/TDMA Dual-Band Amplifier
WI812201
Price: $169.95
|
|
|
|
|
 Product Description
|
WILSON DIRECT CONNECTION CELLULAR/PCS GSM/TDMA DUAL-BAND AMPLIFIER GREATLY REDUCES DISCONNECTS, DROP OUTS, AND NOISE The Dual-Band GSM Amplifier improves signals on both Cellular (824-894 MHz) and PCS (1850-1990 MHz) bands and works with all major North American GSM cellular carriers (Except Nextel/iDEN). Note: Outside antenna for in-vehicle or in-building use is required (not included). Cell phone-specific external antenna adapter is required (not included). AC/DC power supply (optional and not included – for in-building use). Inside This Package - Direct connection amplifier
- DC plug-in power supply with On/Off switch
- 6' extension cable
Features - Improves voice and data signal quality
- Improves data communication rates needed for 3G technologies
- Power control logic ensures maximum output power is within cellular network standards
- Automatic gain control
- Automatic shutdown on overload.
- Advanced electronics receive and transmit better than a cell phone or cellular data card
- Connects directly to a cell phone or cellular data card with a Wilson antenna adapter
- Mobile, marine and in-building use
- DC power supply included - AC power supply sold separately
- Greatly reduces disconnects, drop outs, and noise
- Transmits signal energy to the outside antenna
- FCC and IC type accepted
SAY GOODBYE TO DROPPED CALLS Wilson amplifiers are small, portable, bi-directional devices that deliver service levels in remote locations consistent with what would be expected in areas of high cell network coverage. They amplify a weak or shadowed signal in mobile, marine and in-building applications. When using a Wilson amplifier in conjunction with Wilson antennas, the outside antenna will collect the cell tower signal and send it through the cable to the amplifier. Cell phones and cellular data cards (laptops) then communicate with the improved signal. When a cell phone or cellular data card transmits, the signal is amplified by the amplifier and broadcast back to the cell tower through the outside antenna. |
|
Direct Connection Amplifier Manual (.pdf) Specifications - Part Number: 812201
- Frequency: 824-894 MHz / 1850-1990 MHz
- Gain: 14 dB / 14 dB
- Max Output Power: 3 watts
- Max RF: +35 dBm / +15 dBm
- Noise Figure: 3.5dB nominal
- Flatness: ± 2 dB / ± 2 dB
- Isolation: > 90 dB
- Power Requirements: 12 V, 0.5-1.5 A max
- Connectors: FME-Male 50 ohms
- Dimensions: 5.5 x 4.3 x 1.4 (inches) or 14.0 x 10.8 x 3.5 (cm)
|
|
Product Accessories
|
|
|
|
|
|
|
|
|
|
|
