|
|
|
|
Wilson Electronics 65 dB In-Building Wireless Cellular Amplifier
WI801165
Price: $484.95
|
|
|
|
|
 Product Description
|
WILSON ELECTRONICS 65 DB IN-BUILDING WIRELESS CELLULAR AMP
BI-DIRECTIONAL AMPLIFIER
Wilson amplifiers are small, portable, bi-directional devices that deliver service levels consistent with what would be expected in areas of high cell network coverage. They amplify a weak or shadowed signal in mobile, marine and in-building applications.
When using a Wilson amplifier in conjunction with Wilson antennas, the outside antenna will collect the cell tower signal and send it through the cable to the amplifier. The signal is then amplified and broadcast from the inside antenna to the surrounding area. Cell phones and cellular data cards in that area then communicate with the improved signal. When a cell phone or cellular device transmits, the signal is received by the inside antenna, amplified by the amplifier and broadcast back to the cell tower through the outside antenna.
- Works with all cell phones and laptop data cards
- Significantly improves voice and data signal quality
- Receives and transmits better than your cell phone
- Extends cell phone battery life
- Works with all generations of CDMA, TDMA, GSM and high-speed data technologies
- Improves data communication rates needed for 3G technologies.
- Automatic gain control up to 65 dB
- 2 dB gain step 30-60 dB
- Automatic gain adjusting in the event of oscillation and/or overload
- Gain indicator lights
- Automatic shutdown on overload
- Up to 3-watt power amplifier
- Power control logic ensures maximum output power is within cellular network standards
- Oscillation protection and shutdown auto reset
- FCC and IC type accepted
IN-BUILDING WIRELESS 60dB & 65dB AMPLIFIERS FOR LARGER BUILDINGS
Wilson's 60 dB & 65 dB amplifiers work only in fixed locations and perform best with a Yagi antenna.
- Designed for larger office buildings, warehouses or manufacturing facilities with signal shadowed environments
- 60 & 65 decibel gain amplifiers require 75 feet of separation between inside and outside antennas
- Gives 2.5 times greater coverage area than a 50dB amplifier.
|
|
Wilson 65 dB In-Building Wireless Cellular Amplifier Install Guide (.pdf)
- Frequency: 824-835 MHz, 869-880 MHz
- Gain: 65 dB
- Max Output Power: 3 watts
- Max RF: + 30 dBm / + 30 dBm
- Noise Figure: 3-4 dB typical
- Flatness: ± 2.5 dB
- Isolation: > 90 dB
- Power Requirements:
- Input: 100-240 V AC 50/60 Hz 0.6 A
- Output: 6 V DC 3 A
- Connectors: N-Female 50 ohms
- Dimensions: 5.6" x 3.6" x 1.7" / 14.2 x 9.1 x 4.4 (cm)
- Weight: 1.5 lbs / 0.7 kg
Additional Required Equipment (sold separately) - Outside antenna (Yagi recommended)
- Inside dome, panel or low-profi le antenna
- Antenna coax cable
|
|
|
|
|
|
|
|
