Home >> Manufacturers >> DynaQuip Controls - WaterCop >> WaterCop Water Control Wall Switch
WaterCop Water Control Wall Switch
DQRS100
The remote contoller switch is a hard-wired switch used with the WaterCop water shut-off system. Provides a quick and positive shut-off of the main water supply at the touch of a button.
Price: $39.95

Quantity:
Add to Wishlist

WATERCOP WATER CONTROL WALL SWITCH

ONE BUTTON EMERGENCY SHUT OFF

The WaterCop Water Control Wall Switch provides a quick, convenient, and positive shut-off of your main water supply at the touch of a button. The switch allows remote user operation of WaterCop from convenient or high traffic area of the home. Ideal for the kitchen, utility room, or near a garage entry.

Using standard category-5 computer cabling and RJ45 modular connectors it can be located up to 300 feet from the WaterCop Control Valve.

WaterCop Emergency Water Shut-Off Systems help to effectively reduce the chance of catastrophic water damage caused by common plumbing and appliance problems. This can greatly reduce home insurance risk through proactive loss mitigation. WaterCop Systems can be configured from the following components:

First, choose the correct size Electric Control Valve.
Next add flood sensors to monitor leak-prone areas of you home and temperature sensors to monitor areas that are susceptible to freezing.
Finally add the WaterCop Water Control Switch and cabling to create a smarter home that costs less to insure.

STOP DAMAGING WATER LEAKS...

... before they become major problems!

WaterCop automatic water shut-off systems automatically turn off the water when a leak has been detected. This effectively reduces the chance of water damage due to common plumbing problems.

WaterCop Systems are activated by flood sensors, an optional remote switch, or many types of home security systems. WaterCop systems provide homeowners with added control benefits and peace of mind.

Maintain a smarter home... install a WaterCop today!

Check out these additional products:

WaterCop Low Temperature Sensor
WaterCop Flood Sensor, Single or Dual Probe


WaterCop Installation Guide (.pdf)

  • Uses standard category-5 computer cabling and RJ45 modular connectors.
  • The switch can be located up to 300 feet from the WaterCop Control Valve.
  • The switch features soft touch controls and color-coded LED valve position indicator lights.
  • Mounts in standard 2"x4" single-gang electrical wall box.
  • White only.

Red Arrow Ratings and Reviews
Be the first to rate this product!
Users must be registered & logged in to rate/review a product.


 
 
© Copyright 2010, Home Controls Inc. All Rights Reserved


Powered by San Diego Media MaxEXP