Tripp Lite 2U Pure Sine Wave UPS System, 1500 VA
TPHTR152U

The Tripp Lite Audio/Video Pure Sine Wave UPS System supports enhanced monitoring of UPS and line power conditions via...

Price: $1,614.95

• TPHTR152U Audio/Video Pure Sine Wave UPS System
  
• PowerAlert Software and cabling
  
• Mounting hardware for 4-post rack enclosures
  
• Instruction manual

• HTR15-2U Pure Sine Wave UPS provides perfectly regulated sine wave output within 2% of 100/110/120V (user selectable) under all usage conditions
  
• 1500VA/1200W power handling capacity compatible with micro display devices, projectors, PVRs/DVRs, media center PCs, music servers and other sensitive electronics
  
• Removes harmonic distortion, fast electrical impulses, frequency variations and other hard-to-solve power problems not addressed by other UPS types
  
• Corrects line voltage conditions as low as 65V and as high as 138V back to selectable 100/110/120V (+/-2%) values
  
• 2 switchable load banks (2 outlets each) enable remote outlet management for load shedding or remote reboot of individual devices
  
• Single-line tel/DSL/Ethernet surge suppression
  
• Internal battery set offers 18 min. runtime at half load (600W) and 8 min. at full load (1200W)
  
• Fault-tolerant auto-bypass maintains continuous utility output to connected equipment, even in cases where the UPS suffers internal failure and requires maintenance
  
• Compact rackmount form factor installs in 2 rack spaces (2U) with a maximum installed depth of only 19 in.
  
• Offers simultaneous monitoring by up to 3 directly connected devices through included USB, DB9 , or the monitoring of any number of additional UPS systems over IP with included PowerAlert monitoring software
  
• HID-compliant USB interface enables full integration with built-in power management and auto shutdown features of Windows, Mac OS X and Linux
  
• PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, pager and email notification, event logging and running user-defined script commands
  
• Front panel LEDs offer current monitoring and battery charge level information
  
• UPS ships fully assembled in full compliance with DOT regulations; no time-consuming connection of internal batteries by user required

• Voltage compatibility: 120 VAC (100/110/120V)
  
• Frequency compatibility: 50/60 Hz compatible (auto-sensing)
  
• Output:
  - Output volt amp capacity (VA): 1500
  - Output watt capacity (watts): 1200
  - Output nominal voltage: 120 VAC (100/110/120V)
  - Output voltage regulation: Maintains full-time sine wave output within 2% of selected nominal, less than 3% total harmonic distortion (linear load) / 6% total harmonic distortion (computer load)
  - Output frequency regulation: Regulates line frequency to 50/60Hz +/- 0.05Hz
  - Outlet quantity / type: 6 x NEMA 5-15R
  - Customized load management receptacles: 2 controllable load banks support automated load shedding and remote reboot on demand of locked network devices (bank 1 has 2 outlets; bank 2 has 4 outlets)
  - Overload protection: 20A input breaker
  
• Input:
  - Maximum input amps: 12A
  - Input connection type: NEMA 5-15P
  - Input cord length: 10 ft.
  - Recommended electrical service: 120V 15A
  
• Battery:
  - Full load runtime: 8 min. with internal batteries (1200W)
  - Half load runtime: 18 min. with internal batteries (600W)
  - DC system voltage: 48VDC
  - Typical battery lifespan: 3-6 years, depending on usage
  - Battery recharge rate: Less than 6 hours to 80%
  - Replacement Battery Cartridge: RBC94-2U
  
• Voltage Regulation:
  - Voltage regulation description: On-line, double-conversion power conditioning maintains output within 2% of 100/110/120 volts at all times
  - Overvoltage correction: Maintains output of selected nominal +/-2% during overvoltages to 138V AC
  - Brownout correction: Maintains output of selected nominal +/-2% during undervoltages to 65V AC (at loads greater than 70% undervoltage correction extends to 80V)
  
• LEDs Alarms and Switches:
  - Front panel LEDs: LED STATUS DISPLAY: line power (green), online (green), bypass (yellow), on battery (green), overload (red), battery low (yellow) - 4 LED LOAD / BATTERY LEVEL DISPLAY (100%, 75%, 50%, 25%)
  - Alarms: Multi-function audible alarm with distinctive ring patterns offer notification of backup operation (2 sec. on / 0.5 sec. off), low battery warning (1.25 sec. on / 0.5 sec. off), overload (sounds continuously), UPS fault (4.2 sec. on / 1 sec. off), input voltage out of frequency (2.1 sec. on / 0.14 sec. off) and high input voltage (2.1 sec. on 0.07 sec. off)
  - Switches: Includes power off/on switch to enable system turn on (press ON switch), UPS battery test (press ON switch during normal AC operation), buzzer silence (press ON switch during battery operation) and OFF (press OFF switch) - all switch functions require tha
  
• Surge / Noise Suppression:
  - AC surge suppression: 480 joules
  - AC suppression response time: Instantaneous
  - Dataline suppression: Set of 8-wire RJ style interface jacks offer surge suppression for tel/DSL/Ethernet connections. Pins 1,2,3 and 6 offer Ethernet protection starting at 7.5V and the center two wires, pins 4 & 5, offer tel/DSL line suppression starting at 260V
  - EMI / RFI AC noise suppression: Yes
  
• Physical:
  - Unit Dimensions (HWD/in): 3.5 x 17.5 x 19
  - Unit Dimensions (HWD/cm): 8.9 x 44.4 x 48.3
  - Material of construction: Steel
  - Form factors supported: Rack/Tower (2U)
  - Cooling method: Built-in cooling fan
  - Battery Access: Hot-swap battery replacement supported via front access panel
  
• Environmental:
  - Operating Temperature: +32 to +104 degrees Fahrenheit; 0 to +40 degrees Celsius
  - Storage Temperature: +5 to +122 degrees Fahrenheit; -15 to +50 degrees Celsius
  - Relative Humidity: 0 to 95%, non-condensing
  
• Communications:
  - Network monitoring port: Includes USB and DB9 ports. Built-in DB9 port offers both enhanced RS-232 enabled monitoring data and contact closure monitoring ability. HID-compliant USB interface enables full integration with built-in power management and auto shutdown features of Win
  - Software and cabling included: PowerAlert software CD-ROM
  - WatchDog compatibility: Compatible with Tripp Lite's Watchdog system service to restore operation to locked equipment through soft reboot of application/OS or hard power off/on reboot of connected equipment—ideal for unattended applications
  
• Line / Battery Transfer:
  - Transfer time from line power to battery mode: Zero—online UPS continuously converts incoming AC to DC, then back to AC. When commercial power is interrupted, UPS maintains continuous output from battery reserves with absolutely no disruption in output AC power.
  - Low voltage transfer to battery power: Maintains continuous operation during undervoltages as low as 65V (80V at load levels over 70%). Below this switchover point, output is supported from battery-derived AC power.
  - High voltage transfer to battery power: Maintains continuous operation without using battery power during overvoltages to 138V. Above this point, output is supported from battery-derived AC power.
  
• Certifications: Certifications - Tested to UL1778 (USA), CSA C22.2 No. 107.3 (Canada), NOM (Mexico), Class A (emissions), FCC Part 68 / Industry Canada (Telecommunications)
  
• Special Features:
  - EPO port: Supports Emergency Power Off function via set of dedicated built-in EPO jacks
  - Cold Start: Inverter can be cold started to enable temporary AC output during a power failure
  - Appearance: Attractive all-black color scheme