|
|
|
Single Gang Re-Usable Mud Ring
OEMR1
This nifty little gadget is a combination speaker locator and mud ring. Use it first as a speaker locator, and then mount it elsewhere for use with low voltage devices!
Price: $2.09
|
|
 Product Description
|
SPEAKER LOCATOR AND MUD RING
SINGLE GANG RE-USABLE MUD RING AND SPEAKER LOCATOR COMBO
This nifty little gadget is a combination speaker locator and mud ring.
When used as a speaker locator bracket, fastened to a truss, ceiling joist, or wall stud (member), it should be positioned such that the pre-scored bracket is aligned with the edge of the member so it is easily "snapped" off at the time of speaker installation. After the sheetrock installation, but before the speaker is mounted, the small single-gang opening can be covered with the optional cover, OEMRCVR. The OEMRCVR is a circular, paintable cover that has the aesthetically acceptable look of an electrical box cover waiting for installation of a light or ceiling fixture.
Once the mud ring bracket is snapped off for the speaker installation, the remaining ring can be salvaged and used for future new construction volume control, keypad, or other low voltage device applications.
OEM FOR IN-WALL SPEAKERS AND HOME THEATER PRODUCTS
OEM Systems Company is a manufacturer of Architectural Audio Products and accessories for residential, commercial and institutional applications, including loudspeakers, electronics and Decorator Style Jack Plates which mount in standard J-boxes. Our loudspeaker products flush mount into walls and ceilings, the speaker grilles can be painted, wallpaper or fabric covered to blend into any decor.
|
Specifications
|
|
Single gang opening
Overall dimensions: 6" W x 4" H x .5" D
Pre-scored nailplate
Rear wire tie loop for retaining cables and wires
Installation Instructions
1) Fasten the speaker locator/mud ring on a ceiling joist or stud. Align score with edge of stud.
2) Install drywall. Prior to speaker installation, reach in the single gang opening and snap/breakaway the mud ring from the nailplate.
3) Proceed with cutting the speaker hole as per the manufacturer's instructions.
4) Retrieve the mud ring, and install speaker(s).
5) Use the mud ring for future new construction volume control, keypad, or other low voltage device applications.
|
|
Product Accessories
|
|
|
|
|
|
|
|
|
|
|
Why Automate
