SENSAPHONE 400 or 800

REMOTE MONITORING AND ALARM NOTIFICATION SYSTEM

For small businesses and property owners, the Sensaphone 400 offers an easy, inexpensive way to monitor your remote facility, cabin or vacation home. Installed in a clean indoor environment, it has built-in monitoring for power failures, temperature, and sound monitoring of audible alarms. Four external inputs on the back can be connected to various external sensors to monitor temperature, water on the floor, humidity, intrusion and more.

When an alarm is detected, the 400 can notify four people by making voice phone calls. It will continue to make phone calls until someone responds to the call. The 400 also includes nonvolatile memory and a 24-hour battery backup with user-installed batteries.

When you need to monitor additional conditions or need to notify more people, the 800 is the best choice. It has all of the features of the Model 400, but instead of four external inputs, it is equipped with eight. It can also contact eight people instead of four.

PROJECT IDEA!

Remote Temperature Sensing and Control by Telephone

This project will allow you to monitor and maintain a desired temperature in a cabin or home while it is unoccupied, and allows the ability to force the temperature to increase or decrease in anticipation of occupying that cabin or home.
Click here for details!

Features:

• Monitor 4 or 8 conditions, plus power failure and sound level.
• Notify 4 or 8 people with custom voice phone calls.
• Control a thermostat or other device automatically, manually, even remotely.

Input Zones:
• Flexible inputs that support:
Normally Open or Normally Closed contacts
Temperature sensors: -20°F to 150°F
Four channels in the Model 400
Eight channels in the Model 800
• Automatic input type configuration.
• Programmable recognition times.
• Internal calibration.

Alarm Notification:
• Four phone numbers in the Model 400.
• Eight phone numbers in the Model 800.
• Makes voice phone calls with customized messages for easy identification.
• Built-in alarm test function to simulate and test the notification process.
• Includes telephone Line Seizure.

Voice Messages:
• Built in vocabulary for keypad programming and sensor readings.
• Record custom voice phrases in your own voice to describe each input zone.
• Record site identification message.

Microphone:
• Internal microphone for custom voice message recording.
• Monitor high sound alarms.
• Microphone can also be used for remote listen-in feature.

Output Relay:
• Low voltage NO/NC output relay included.
• Manual or automatic alarm response switching.

Remote Access:
• Call in with any Touch-Tone phone to check the status of all monitored conditions.
• Make programming changes remotely from any Touch-Tone phone.
• Remotely control the output relay.

Local Access:
• Keypad and speaker for local programming.
• Easy voice-prompted programming.
• Password-protected to restrict programming access.

Compatibility:
• The Sensaphone 400 is a direct replacement for the model 1104 and CottageSitter.
• The Sensaphone 800 is a direct replacement for the model 1108.

Power Supply:
• Comes with plug-in power supply.
• 24 Hour battery backup using 6 size C alkaline batteries (not included).
• Automatically monitors for power failure alarms.
• International power options available.

Built in CottageSitter Control:
• The built in relay can be used to remotely change the temperature of a dual setback thermostat. Provide your own, or order the FGD-0064 Thermostat from Sensaphone.