|
|
|
|
Sensaphone IMS-4816 External Probe Temperature Sensor
PHIMS4816
Price: $98.10
|
|
|
|
|
 Product Description
|
SENSAPHONE® IMS-4816 EXTERNAL PROBE TEMPERATURE SENSOR MONITOR TEMPERATURES IN AREAS A TRADITIONAL SENSOR WON'T FIT The Sensaphone IMS-4816 Temperature Sensor with External Probe is designed to connect to the Sensaphone IMS product line and monitor temperatures in areas where a traditional sensor won't fit. The electrical connection between the sensor and IMS unit is made via the attached RJ-45 patch cable. The sensor probe may be secured inside equipment using the included clamp or it may be hung using tie wraps. Do not install the black plastic enclosure inside of a refrigerator or freezer. The Temperature Sensor with External Probe comes with an attached 7' cable with an RJ-45 plug on the end and a weatherproof probe with 12' of cable. If the sensor installation is close to the IMS unit, you can plug it directly into an IMS environmental input. If the cable is too short you can use the included RJ-45 adapter and a longer patch cable to extend the length. For applications where the sensor may be far from the IMS unit, you may utilize your existing network wiring infrastructure. For example, the sensor may be installed in another room or another floor. Connect the sensor to your structured wiring network via an RJ-45 jack. At the other end, connect a patch cable from your structured wiring patch panel directly to the Host or Node environment input. This Sensor is compatible with the IMS-4000, IMS-4000 Node, IMS-1000 Sensaphone Versions. SENSAPHONE® REMOTE MONITORING SOLUTIONS Unexpected events happen. But Sensaphone remote monitoring systems are on alert full time to notify you of threatening conditions, so you can respond quickly and prevent costly damages and disruptive downtime. From wireless capabilities to ultra-low temperature tolerant systems, you'll find the right Sensaphone for your monitoring needs. Start protecting your investments today. |
|
IMS-4816 Temperature Sensor with External Probe Spec Sheet (.pdf) - Temp Range: 32° to 176°F (0° to 80°C)
- Humidity: 5–90% RH
- Sensor type: Sealed thermistor probe
- Accuracy: ± 3°F
- Connector: 7’ Cable with RJ-45
- Housing: Black plastic
- Compatibility: IMS-4000, IMS-4000 Node, IMS-1000
|
|
|
|
|
|
|
|
