|
|
|
|
Sensaphone IMS-4815 Temperature Sensor
PHIMS4815
Price: $134.10
|
|
|
|
|
 Product Description
|
SENSAPHONE® IMS-4815 TEMPERATURE SENSOR HIGHLY RECOMMENDED FOR EVERY COLD STORAGE APPLICATIONS The Sensaphone IMS-4815 Temperature Sensor is designed to connect to the Sensaphone IMS series product line. The glass bead filled vial will buffer any momentary fluctuations that may cause a preliminary alarm such as defrost cycles, opening of doors and fans circulating air. The glass beads will slow the response time of the sensor allowing normal daily operations to occur without having an alarm initiated. This is a highly recommended sensor for every cold storage application. The Temperature Sensor comes with an attached 7' cable with an RJ-45 plug on the end and a weatherproof probe with 12' of cable. If the sensor is close to the IMS unit, you can plug the sensor directly to an IMS environmental input. If the cable is too short you can use a RJ-45 adaptor and a longer patch cable to extend the length. For applications where the sensor may be far from the IMS unit, you may utilize your existing network wiring infrastructure. For example, the sensor may be installed in another room or another floor. Connect the sensor to your structured wiring network via a RJ-45 jack. At the other end, connect a patch cable from your structured wiring patch panel directly to the IMS unit environment input. This sensor is compatible with the IMS-4000, IMS-4000 Node, and the IMS-1000 Sensaphone versions. SENSAPHONE® REMOTE MONITORING SOLUTIONS Unexpected events happen. But Sensaphone remote monitoring systems are on alert full time to notify you of threatening conditions, so you can respond quickly and prevent costly damages and disruptive downtime. From wireless capabilities to ultra-low temperature tolerant systems, you'll find the right Sensaphone for your monitoring needs. Start protecting your investments today. |
|
IMS-4815 Temperature Sensor Spec Sheet (.pdf) - Temperature Range: -122° to 53°F (-86° to 12°C)
- Humidity: 5 to 90% RH
- Sensor type: Sealed thermistor probe
- Accuracy: ± 3°F
- Connector: 7’ cable with RJ-45 plug
- Housing: Black plastic
- Dimensions: 2.13" x 0.6" x 1.38"
- Compatibility: IMS-4000, IMS-4000 Node, IMS-1000
|
|
|
|
|
|
|
|
