|
|
|
|
Seco-Larm Enforcer Passive Video Balun with Ground Loop Isolation
SEEVTPB1V1TGQ
|
|
|
|
|
|
 |
 Product Description
|
| SECO-LARM PASSIVE VIDEO BALUN WITH GROUND LOOP ISOLATOR USES LOW-COST CAT 5 CABLE INSTEAD OF COSTLY COAXIAL CABLE The EVT-PB1-V1TGQ is a Passive Video Balun with Ground Loop Isolator. A Passive Video Balun allows a CCTV camera's video signal to be transmitted over low-cost CAT5 unshielded twisted pair (UTP) cable instead of costly coax cable. They are suitable for full-motion color and monochrome cameras and provide a quick, low-cost way to connect CCTV cameras to a monitor, multiplexer, or video recorder at up to 980 feet away. Video ground loop isolators are passive devices that help to reduce ground loop interference caused by multiple building grounds and differences in ground potential. Ground loop isolators can be installed in new installations or added to existing installations. Video ground loop isolators should be installed on the camera side of your cable. BUILDING A SECURE FUTURE SINCE 1971 SECO-LARM started as a developer of lighting devices in 1971. However, the company foresaw the need for reliable yet affordable security products, and over next few years established SECO-LARM as a leading multinational OEM and private label manufacturer of equipment for some of the best-known companies in the security business. |
|
SecoLarm SEEVTPB1V1TGQ Passive Video Balun Spec Sheet (.pdf)
SecoLarm SEEVTPB1V1TGQ Passive Video Balun Manual (.pdf) Features - Transmits a video signal up to 980 feet (300m).
- Built-in ground loop isolation.
- Built-in surge protection.
- Gold-plated BNC connector improves reliability and product life.
- RoHS compliant.
- Passive operation -- No external power required.
- Uses low-cost CAT 5 cable instead of costly coaxial cable.
- High immunity from interference -- Built-in impedance coupled device and noise filter. Helps to reduce RF interference, cross talk, picture tearing and other picture quality problems.
- BNC and removable terminal block.
- Small size
Specifications - Bandwidth: Video DC to 8MHz
- Maximum Input: 1.0Vp-p
- Insertion Loss: <0.5dB
- Frequency Response: 0-3dB at 10MHz
- Isolation Voltage: 600VDC (Min)
- Insulation Resistance: 100 Ohm
- Transient Voltage Suppression: 12Vrms
- Range: 980’ (300m)
- Connectors In: BNC Male
- UTP Connector Out: Removable terminal block
- Impedance: 75 Ohms (BNC) 100 Ohms (UTP)
- Dimensions: 3-1/8" x 1-3/16" x 1-1/16" (79 x 30 x 26 mm)*
- Material: ABS Black
- Temperature: Operating temp. 32°~131° F (0°~55° C)
* Case alone is 2-1/8" (54mm) |
|
|
|
|
|
|
|
