Price: $164.95

UP TO 164' AT 1080p RESOLUTION

The SEMVEAH020Q extends the range of traditional HDMI cabling methods by using an active transmitter and receiver to send video and audio over a single Cat5e/6. HDMI formats as large as 1080p can be transmitted up to 164' (50m) between the two units with zero signal loss by using integrated circuits in the receiver and transmitter.

• Connect HDMI equipment using low-cost Cat5e/Cat6 UTP cable.
• Works with full-motion video and audio signals up to 164ft (50m) for 1080p resolution, 328ft (100m) for 480i resolution.
• HDMI over Cat5e/6 without any signal loss.
• Supports 480i/480p/576i/576p/720p/1080i/1080p.
• Built-in equalization and signal boost function.
• Auto adjusts the equalization and amplification to eliminate feedback.
• Signaling rates up to 2.25Gbits.
• Compact size.
• 5VDC Power supply included.
• Support DDC, EDID and hot-plug detection.
• HDMI 1.2a and HDCP 1.1 compliant.

Flexibility: Traditional HDMI cables present a number of challenges in long cable runs. HDMI cables are rigid in structure and fixed in length making them very difficult to use in some applications. By using Cat5e/6 to transmit HDMI signals, the length and route the wiring takes can now be determined on an application by application basis.

Signal Strength: Traditional HDMI cables have limitations on the signal strength they can provide over long distances. Using an active transmitter and receiver, the MVE-AH020Q overcomes these limitations by providing a clearer signal farther than HDMI cable alone.

Distance: The MVE-AH020Q is capable of providing a clear HDMI signal over much greater distances than HDMI cable alone. Using Cat6 cabling, a 1080p HDMI signal can be transmitted up to 164’ (50m).

Formats Supported: The MVE-AH020Q supports both progressive scan and interlaced formats.

Plug and Play: The MVE-AH020Q comes as a complete set consisting of a transmitter and receiver. No adjustments or settings need to be made, the unit is ready to use right out of the box.

Zero Signal Loss: Integrated circuits in the transmitter and receiver clean, buffer, and amplify the HDMI signal to prevent signal loss and ensure a clear signal regardless.

DVI Support: The MVE-AH020Q can be used with an HDMI to DVI adapter to support multiple components of a home theater system.

MVE-AH020Q Installation Guide (.pdf)

• Video format supported DTV/HDTV: 1080P/1080i/720P/576P/480P/576i/480i
• Signaling rates: 2.25 Gbits x 3
• Signal Inputs/Output
  • Input Video Signal: 0.5~1.0 Vp-p
• Input DDC Signal: 5Vp-p (TTL)
• Output Video: HDMI 1.2a
• Inputs/Output Connectors
  • HDMI Connector: HDMI Type A, 19 pin female
  • Link Connector: RJ-45 x 2
• Transmission distance - CAT-6 cable: 164ft (50m) @ 1080p, 328ft (100m) @ 480p
• Resolutions (HDTV)
  • Interlaced: 480i,576i,1080i
  • Progressive: 480p,576p,720p,1080p
• Dimensions (W-H-L): 3-1/8"L 1-3/4"Wx7/8"Hx(79x44x22 mm)
• Weight (Net): 8.7-oz (0.246Kgs)
• Power Consumption: 400mA@5VDC
• Operating Temperature: 32°~158° F (0°~70° C)
• Operating Humidity: 5% to 90% RH (no condensation)
• Power Supply: External, 5VDC@2A