SECO-LARM ENFORCER VOICE DIALER E-920B (Replaces E-920A)

AUTOMATICALLY DIALS 4 NUMBERS IN CASE OF EMERGENCY

The Seco-Larm Enforcer Voice Dialer automatically dials up to four telephone numbers and delivers up to two different messages when triggered by an alarm system.

When triggered by an alarm system, the SEE920B Voice Dialer can dial up to four telephone numbers and/or pager numbers. Each number can contain up to 32 digits (including pound (#) tones and pauses used in pager numbers).

When the dialer is activated, the LCD will show the numbers dialed at each step of the dialing process. When the dialer makes a connection, one of two possible 16-second voice messages will be delivered. The user can record each message to respond to one or two inputs. Each message is then delivered repeatedly for one minute to ensure the full message is received. This process will repeat for each number stored.

If within 8 to 10 rings there is no connection, the SEE920B will automatically dial the next programmed number.

If the dialer has attempted to dial each number one time and the unit is still in the alarm state, the dialer will attempt to call all numbers a second time. All busy numbers will be dialed a third time.

Note: If the dialer is programmed to call a voice pager service which requires operator assistance, the service should be notified in advance regarding the meaning of the message.

SECO-LARM IS THE PREMIER CHOICE

Whether for physical security, CCTV, access control, RF equipment, or vehicle security, SECO-LARM is the premier choice. Only SECO-LARM gives its distribution and installation partners such an extensive range of dependable, cost-effective security products with a full program of service and support.

Seco-Larm E-920B Voice Dialer Install Manual (.pdf)

Features:

• Easily connects to an alarm panel and automatically dials out when activated.
  
• 2 independent voice messages. Stores up to 4 telephone numbers, cellular numbers, or pager numbers.
  
• Delivers a message of up to 16 seconds to each number stored.
  
• Instant trigger or exit and entry delay settings.
  
• Repeats the voice message for one minute per call.
  
• Waits 8 to 10 rings before dialing the next programmed number
  
• Calls two times when there is no answer or three times when the line is busy.
  
• EEPROM retains memory if power is lost for up to one year.
  
• Optional 9-Volt internal battery provides stand-by power for approximately two to three days.
  
• Use worldwide because of Universal Dial Tone.
  
• Use with PBX or regular telephone systems.
  
• 2 NO/NC trigger inputs.

• Operating voltage: 12VDC
  
• Current Draw: 20mA (standby); 60mA (operate); 250mA (siren active)
  
• Trigger Inputs: 2 NO/NC
  
• Operating Temperature: -4° ~122°F (-20 ~50°C)
  
• Backup Battery: 9VDC (not included)
  
• # of Tel. Numbers: Up to 4
  
• Max. Digits per Tel. #: 32
  
• Case Material: ABS plastic
  
• Weight: 11oz (320g)
  
• Dimensions: 5-7/8” x 4” x 1-1/2” (148 x 100 x 39 mm)