Skip to main content
  • Home
  • Seco-Larm Enforcer Reflective Beam Sensor with Round Reflector, 45'

Seco-Larm Enforcer Reflective Beam Sensor with Round Reflector, 45'

SKU: SEE931S45RRQ

Usually ships in 3-5 days.

$66.53

WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Details

Easy-To-Setup Break Beam Sensor

Create a secure perimeter along your driveway, front door, side gate and more with the Seco-Larm Enforcer Retro-Reflective Photoelectric Beam Sensor. The kit creates an invisible infrared beam and alerts you when the beam is broken by sounding your alarm (sold separately). The sensor is constructed in a rugged, weatherproof enclosure for maximum durability wherever you install it.

  • Easy to install with included mounting hardware
  • Weatherproof construction for indoor or outdoor use
  • Adjustable response time and sensing range
  • LED lights indicate status

This kit can be used for a variety of applications. Use it as an alarm to protect yourself from home intruders. Mount it in front of a driveway so you know when a car pulls up. You can even use the sensor as a parking indicator in your garage to help you park in the right spot.

Contents

  • Transmitter/Receiver
  • Sensor Mounting Brackets
  • Reflector
  • Reflector Hood

NOTE: Requires a security system or alarm device to alert you when activated.

Seco-Larm Security Products

So many places and things to protect; so many ways to protect them; one partner: Seco-Larm. Under the Enforcer trademark, Home Controls offers an impressive line of Seco-Larm security products, ranging from simple switches to some of the most sophisticated alarm devices. Whether for physical security, CCTV, access control, RF equipment, or vehicle security, Seco-Larm is the premier choice. Seco-Larm gives its customers such an extensive range of dependable, cost-effective security products with a full program of service and support.

Specifications

  • Manufacturer Part #: E-931-S45RRQ
  • UPC: 676544013242
  • Finish: Black
  • Type: NIR Retro-Reflective
  • Sensing Range: 0.5 to 45 feet (0.1 to 14m)
  • Supply Voltage: 12 to250 VAC/VDC
  • Current Drain:
    • 12VDC: Standby: 20mA, Active 40mA
    • 24VDC: Standby 10mA, Active 20mA
  • Response Time: 5 to 100ms adjustable
  • Light Source: IR LED
  • LEDs: Yellow LED (alignment), Red LED (trigger)
  • Output: SPDT Relay Output (NO/NC/COM)
  • Switching Capacity: 3A at 120VAC/3A at 30VDC
  • Enclosure: IP66 Waterproof
  • Ambient Temp: -4 to 131° F (-20 to 55° C)
  • Warranty: 1 Year

Downloads

»Seco-Larm Enforcer E-931-S45RRQ Reflective Beam Sensor with Round Reflector Installation Manual (.pdf)