Skip to main content
  • Home
  • Seco-Larm Enforcer Power Supply Charger, 2.5A Continuous, 3A Peak

Seco-Larm Enforcer Power Supply Charger, 2.5A Continuous, 3A Peak

SKU: SEST24063AQ

Usually ships in 3-5 days.

$30.14

WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Details

Automatically Recharges Backup Batteries

The Seco-Larm Enforcer Power Supply Charger (2.5A Continuous, 3A Peak) helps ensure that your alarm system is always powered. It features a built-in charger that automatically recharges your backup batteries (not included). Protected by fused output, input polarity protection diodes, and back-up battery polarity reverse protection, the power supply charger can be used to maximize the security and efficiency of nearly any alarm or access control installation.

  • Automatically recharges backup batteries (not included)
  • Built-in short-circuit protection
  • Fused output for a regulated charge
  • Automatic switch-over to backup battery if main power is lost
  • LEDs indicate power status

Contents

  • Power Supply/Charger
  • (2) Wires for Backup Battery Charger
  • (2) Acrylic Foam Tape for PCB Mount
  • Manual

NOTE: Rechargeable back-up battery not included.

Building A Secure Future Since 1971

So many places and things to protect; so many ways to protect them; one partner: Seco-Larm. Home Controls offers an impressive line of Seco-Larm security products, ranging from simple switches to some of the most sophisticated alarm devices. Whether it's physical security, CCTV, access control, RF equipment, or vehicle security, Seco-Larm is the premier choice. Seco-Larm gives its customers an extensive range of dependable, cost-effective security products with a full program of service and support.

Specifications

Product Features

  • Switch selectable DC voltage output
  • Regulated and filtered output voltage
  • Short circuit protection
  • Thermal protection and compensation
  • Fused protection for battery charger
  • Two LEDs to indicate AC power input and DC power output status
  • Compatible with lead acid or gel-type rechargeable battery
  • Reverse polarity protected
  • Low operating temperature

Technical Details

  • Manufacturer Part #: ST-2406-3AQ
  • Operating Voltage: 6, 12, 24 VDC
  • Status LEDs: AC Input: Green, DC Output Red Red/Blue (Blue indicates 24V)
  • Current Draw:
    • Continuous: 2.5A
    • Peak: 3.0A
  • Output Current (Maximum Charge): 6V = 200mA, 12V = 400mA, 24V = 700mA
  • Master Fuse: 5 Amp
  • Low Battery Cutoff: When battery voltage is less than 20 percent of set output voltage
  • Operating Temperature: -4° to 149°F (-20° to 65°C)
  • Dimensions: 3-3/8 x 2-7/8 x 1-5/16 inches (81 x 73 x 33 mm)
  • Approvals: CE, RoHS
  • Warranty: 1 Year

Downloads

»Seco-Larm Enforcer ST-2406 Power Supply Charger Spec Sheet (.pdf)
»Seco-Larm Enforcer ST-2406 Power Supply Charger Installation Manual (.pdf)