Seco-Larm Enforcer PoE Repeater
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
Details
Install Longer PoE Cable Runs
Extend Power over Ethernet (PoE) signals up to 394 feet with the Seco-Larm Enforcer PoE Repeater. The repeater receives power and data signals and then re-transmits the signals further over an extended length of Cat5e/6 4-pair UTP cable. This plug-and-play solution saves you money and hassle by eliminating the need to purchase additional hubs, switches, etc. Two repeaters can be used in series for a maximum transmission range of 1,116 feet.
- Extends power and data signals (PoE) up to 394 feet
- Connects to Cat5e/6 4-pair UTP cable
- Compliant with standard PoE IEEE 802.3af
- Supports 10/100/1000 BASE-T transmission rates
- LEDs indicate power status and data port status
Designed for quick and easy setup, the PoE Repeater does not require external power or any configuration. It features auto-sensing technology to self-detect PoE or non-PoE devices. The compact repeater is sealed and fanless with integrated mounting tabs for wall-mounting (screws included).
Contents
- PoE Repeater
- (4) Screws
- (4) Plastic Wall Anchors
- User Manual
Building A Secure Future Since 1971
So many places and things to protect; so many ways to protect them; one partner: Seco-Larm. Under the Enforcer trademark, Home Controls offers an impressive line of Seco-Larm security products, ranging from simple switches to some of the most sophisticated alarm devices. Whether it’s physical security, CCTV, access control, RF equipment, or vehicle security, Seco-Larm is the premier choice. Seco-Larm gives its customers an extensive range of dependable, cost-effective security products with a full program of service and support.
Specifications
- Manufacturer Part #: NR-P101FQ
- Connector:
- In: RJ45
- Out: RJ45
- Power Consumption:
- Standby: 1.1W (23mA)
- @10Mbps: 1.44W (30mA)
- @100/1000: Mbps 1.92W (40mA)
- Transmission Range:
- Single repeater: Up to 722 feet (220m)*
- Two repeaters: Up to 1,116 feet (340m)*
- Max. Device Power Range with PoE Switch:
- 1st PoE Repeater: 8.58W@722 feet (220m)
- 2nd PoE Repeater: 4.21W@1,161 feet (340m)
- PoE: IEEE 802.3af Standard, 48V, 12.95W
- Data Link: Pin 1/2, 3/6, 4/5, 7/8
- Power Link: Pin 1/2 (+), 3/6 (-) end-span
- Material: Aluminum
- Operating Temperature: 32° to 131° F (0° to 55° C)
- Dimensions: 2-5/8 x 4-5/16 x 1-1/16 inches (67 x 110 x 27 mm)
- Weight: 6.4 ounces (180g)
- Warranty: 1 Year
*The maximum distances are typical for installations using 24AWG CAT5 cable or better. Actual limits depend on cable quality and POE device characteristics.