RapidRun Multimedia Runner Cable (Blue) Test Adapter
CG42119

Price: $10.35

RAPIDRUN™ MULTIMEDIA RUNNER CABLE (BLUE) TESTER

RUN A QUCK TEST OF YOUR MULTIMEDIA RUNNER

RapidRun™ is known for its versatility, convenience and ease of installation. However, even the most experienced installers will run into hazards that damage or kink the cable during installation. Problems associated with damage during installation are seldom found until the final phase of the installation when the cable is already enclosed in the wall.

The RapidRun Runner Test Adapters have been designed to allow an installer to run a quick continuity test of the Runner prior to leaving the job site, which ensures proper functionality. These test adapters include two pieces: a modified RapidRun connector that connects to the display end of the Runner and an RJ45 adapter cable that connects to the input of a common network cable tester.

The Runner Cable Test Adapters are separately available for Multimedia (blue) Runners, PC (yellow) Runners, and Digital (red) Runners.

RAPIDRUN™ SOLUTIONS

RapidRun is the most complete audio/video cabling system – built to save installation time, accommodate changes, and reduce the likelihood of return service calls due to faulty field terminations.

RapidRun was designed to evolve with your constantly expanding needs. This revolutionary system pioneered a modular Wall Plate, providing the reliability of a factory termination in the field.

Putting an end to restrictive cabling and time-consuming installation, the genius behind RapidRun starts with the Runner – the main base cable that runs through walls, rooms and fixtures. To expand its flexibility, multiple signal types can be supported over your choice of Runner cable – such as VGA, Composite Video, S-Video, Component Video, or HDMI™ and DVI.

Just select the Wall Plate or Flying Lead that is right for your A/V application, connect the Break-Away to the Runner and with a twist and turn, your termination is complete.

RapidRun is the fast, complete A/V cabling system.

• Color-coded blue for use with RapidRun Multimedia Runners
• Easy continuity testing using a common network cable tester
• Includes modified RapidRun connector and RJ45 adapter cable

• Attach the modified RapidRun connector to the display end of the Runner cable.
• Connect the network tester to the source end of the Runner cable using the RJ45 adapter cable.
• Run a continuity test on the cable.
• Pins 4 and 5 should show as a short on the test readout.
• If you do not get this readout, please contact your RapidRun sales representative for assistance.