RAPIDRUN® YELLOW (PC) DB9 + RCA COMPONENT VIDEO WALLPLATE CONTROL YOUR A/V EQUIPMENT WITH COMPONENT VIDEO OUTPUTS; 1080p RESOLUTION! Use this wall plate when one male DB9 connector plus RCA connectors are needed as when RS-232 control is needed for component video devices. Whether hanging a projector in a classroom or installing a commercial digital signage system, a clean, crisp signal is delivered every time. Please Note: Each complete RapidRun solution requires a break-away flying lead or wall plate to terminate each end of the runner cable. For each runner you will need (2) break-away flying leads, (2) wall plates, OR (1) break-away flying lead and (1) wall plate. Available In Black, Ivory, and White. RAPIDRUN™ SOLUTIONS RapidRun is the most complete audio/video cabling system – built to save installation time, accommodate changes, and reduce the likelihood of return service calls due to faulty field terminations. RapidRun was designed to evolve with your constantly expanding needs. This revolutionary system pioneered a modular Wall Plate, providing the reliability of a factory termination in the field. Putting an end to restrictive cabling and time-consuming installation, the genius behind RapidRun starts with the Runner – the main base cable that runs through walls, rooms and fixtures. To expand its flexibility, multiple signal types can be supported over your choice of Runner cable – such as VGA, Composite Video, S-Video, Component Video, or HDMI™ and DVI. Just select the Wall Plate or Flying Lead that is right for your A/V application, connect the Break-Away to the Runner and with a twist and turn, your termination is complete. RapidRun is the fast, complete A/V cabling system. |
