RAPIDRUN® CL2-RATED PC EXTENSION CABLE SUPPORTS RESOLUTIONS UP TO 1600 x 1200 PIXELS (UXGA RESOLUTION) Use this CL2-rated PC extension for adding that extra length you need in the field without replacing the original runner. Each connector includes a protective pulling cap that can withstand 30 pounds of pulling tension. This cable uses three 28 AWG coaxial cables with braided copper shielding, and three 26 AWG twisted pair plus a single 26 AWG pair. CL2-Rated for in-wall installations. Terminate with flying leads (with lengths up to 10 feet), or with wall plates (available in three colors) to meet the specific requirements of your installation. Please Note: Each complete RapidRun PC Runner solution requires a break-away flying lead or wall plate to terminate each end of the runner cable. For each runner you will need (2) break-away flying leads, (2) wall plates, OR (1) break-away flying lead and (1) wall plate. RAPIDRUN™ SOLUTIONS RapidRun is the most complete audio/video cabling system – built to save installation time, accommodate changes, and reduce the likelihood of return service calls due to faulty field terminations. RapidRun was designed to evolve with your constantly expanding needs. This revolutionary system pioneered a modular Wall Plate, providing the reliability of a factory termination in the field. Putting an end to restrictive cabling and time-consuming installation, the genius behind RapidRun starts with the Runner – the main base cable that runs through walls, rooms and fixtures. To expand its flexibility, multiple signal types can be supported over your choice of Runner cable – such as VGA, Composite Video, S-Video, Component Video, or HDMI and DVI. Just select the Wall Plate or Flying Lead that is right for your A/V application, connect the Break-Away to the Runner and with a twist and turn, your termination is complete. RapidRun is the fast, complete A/V cabling system. |
