RCS SERIAL COMMUNICATING THERMOSTAT

RS485 INTERFACE

RS485 Network Interface

• 128 x 64 Backlit Graphical Display
  
• 6 Buttons with On Screen Labels
  
• 4 LEDs with On Screen Labels
  
• Text Messaging via Network
  
• SmartVent Fresh Air venting
  
• Fresh Air damper control
  
• Remote Temp Sensors
  
• Outside Temp Sensor
  
• Commstar Network and WinEVM compatible

Standard Thermostat Functions

Current Temperature Display
Outside Temperature Display
Setpoint Display and Control
System Mode Display and Control
Fan Mode Display and Control
Time Display

LED Displays

4 LEDS with Dynamic On Screen Labels

Exclusive Message Display
Send text messages via the network!

Message Icon with instant access button
Message notification LED
Each message up to 80 Characters
Stores 16 messages
Date/Time Stamped

Multi-Menu Screens

Menu selection and scrolling
Main Thermostat Screen
Message Screen
Schedule Setup
Set Clock
Sensor Calibration
Thermostat Setup
Thermostat Info

HVAC System Compatibility
Works with all Standard Gas/Electric and Heat Pump HVAC systems including Multi-stage units.

• Central HVAC systems or separate heating/cooling systems with separate RH/RC transformers.
  
• Standard gas/electric HVAC Systems: Two stage heating/two stage cooling.
  
• Heat Pump HVAC Systems: Three stage heating/two stage cooling.
  
• Fan system: Selectable for standard or fan with heat for electric heat systems.
  
• Heat Pump Change Over valve (reversing valve): Selectable for change over with heat or cool operation (O or B output).
  
• Emergency Heat: In Heat pump mode, Emergency Heat mode is selectable from the wall display unit.

Remote Sensors: The TR60 supports up to 2 remote sensors. It features ôauto detect" of any remote sensors which are connected and automatically configures the control unit to use them. Remote and averaging functions. Uses RCS remotes sensors such as the RTS3 and RTS4.

Serial Communications Interface: RS485 network communications, 2 wire + ground, half duplex. Communications setup is 9600 baud, 8 bits, no parity and 1 stop bit. Supports RS485 network addresses up to 254 thermostats. Uses simple ASCII protocol supported by virtually all control systems.