RCS THERMOSTAT WITH ZWAVE INTERFACE

NEW ALL IN ONE DESIGN!

The TZ43 thermostat provides for typical thermostat control of a central heating and cooling HVAC system plus has the added feature of ZWave communications for remote control.

The thermostat has a large, backlit graphical display, control buttons, status LEDs and a temperature sensor. The thermostat can display multiple screens for different functions of the thermostat. In the default thermostat control screen, shown below, it displays the current temperature, setpoint, system mode, manual fan mode, time, outside temperature and other information.

• Z-Wave Compatible
  
• Standard or Heat Pump HVAC Systems
  
• 128x64 Backlit Graphical Display
  
• 6 Buttons with On Screen Labels
  
• Remote Control of All Thermostat Functions
  
• Optional Remote Sensors
  
• Wall mount or mounts on single-gang junction box

RCS COMMUNICATING THERMOSTATS

RCS Communicating Thermostats function as standard thermostats and in addition allow remote commands to set specific temperature setpoints and HVAC modes. Models control standard gas/electric or Heatpump, multi-stage heat and cool.

RCS Z-Wave Compatible Thermostat Manual (.pdf)

Thermostat Features

• Local temperature display on a backlit LCD
  
• Setpoint display and control
  
• System Mode (Off, Auto, Heat, Cool)
  
• Fan Mode display and control (Auto, On)
  
• On-screen setup of HVAC Type, Fan Type, Changeover type for HP systems, F/C mode and sensor calibration
  
• Compatible with the majority of HVAC systems

Technical Specifications

HVAC System Compatibility

• Central HVAC systems or separate heating/cooling systems with separate RH/RC transformers (split)
  
• Standard gas/electric HVAC Systems: 2-stage heating, 2-stage cooling
  
• Heat Pump HVAC Systems: 3-stage heating, 2-stage cooling
  
• Fan system: Selectable for gas or electric heat systems.
  
• Heat Pump Change Over valve (reversing valve): Selectable for change over with heat or change over with cool (O or B output)
  
• Emergency Heat: In Heat pump mode, Emergency Heat mode is selectable from the thermostat
  
• Compressor short cycle protection delay of 6 minutes (adjustable)
  
• Automatic heating and cooling changeover
  
• Fan Cycler feature

Remote Sensors

• The TZ43 supports up to 2 indoor remote sensors
  
• Remote sensor can replace internal sensor or provide averaging
  
• Flush Mount Remote Temperature Sensor (RTS3)

Wiring Requirements

• 18 AWG
  
• Uses standard thermostat connections (C, R, W, Y, G1, G2)

Power Requirements

• 24VAC Note: Requires both R and C wires from the HVAC System

Dimensions

• 5"x3"x3/4"