|
|
|
PulseWorx UPB Wall Switch/Dimmer, 600W
PCWS1D6
Highest reliability powerline based control switch that can either be set for dimming or ON/OFF only operation. Top and bottom rocker switch actions...
Price: $138.29
|
|
 Product Description
|
PULSEWORX UPB WALL SWITCH - STANDARD DIMMER, 600 WATTS
ULTRA RELIABLE POWERLINE CONTROL BASED SWITCH
The WS1D Wall Switch Dimmer is a high quality wall switch and light dimmer all wrapped up in one. It not only provides exceptional local control of its lighting load but it is the first wall switch to provide remote control operation via the Universal Powerline Bus (UPB™) two-way powerline communications technology.
Controllers spread throughout your house can remotely command your Wall Switch Dimmer to go to different light levels at different fade rates. Because it communicates on the powerline, no new wires are required to install this device. The Wall Switch Dimmer is also capable of storing up to 16 preset light levels and fade rates which allow it to be involved in single command triggered scenes.
The WS1D Wall Switch Dimmer has a decora-style rocker switch that is used to control its lighting load. The rocker switch can be used to turn the lights on and off as well as to brighten and dim the lights. Not only does the rocker switch control the lighting load, but it can also be configured to transmit UPB™ commands and reports that are useful in controlling other devices and providing feedback to display devices.
Easy To Configure
Like all PulseWorx devices, the WS1D can be initially configured using PCS's free UPStart Setup Software tool. UPStart enables configuring such parameters as Network Name, Network ID, Unit ID, Room name, Device name, default on light levels, fade rates, LED colors, dimming disable, auto shut-off time, etc. as well as test the operation and communication strength of the device. UPStart has the option to configure an entire network off-line and then download the information into the devices after they are installed in the home.
PULSEWORX™ PRODUCTS UTILIZE UPB™ TECHNOLOGY
PulseWorx™ is a complete Lighting Control System that uses existing powerlines to give residential customers one-touch control over their home's lighting. PulseWorx™ products are designed to work within the current framework that already exists in the home—no new wires are required. PulseWorx™ products utilize UPB™ technology, providing the most reliable powerline controls available today.
|
Specifications
|
|
PulseWorx WS1D Dimmer Switch Manual (.pdf)
Light Dimmer
The WS1D has Light Dimmer logic capable of producing 200 different levels of light output as well as off. The Light Dimmer can be configured (or commanded) to change light levels immediately (ôSnap") as well as gradually (ôFade").
Rocker Switch
The WS1D has a decora-style Rocker Switch made up of two momentary pushbutton switches: one at the top and one at the bottom. The Rocker Switch can be used to set new light levels, set new operating modes, and to trigger transmission of UPB messages.
UPB Receiver
The WS1D has UPB Receiver Logic capable of receiving UPB Communication Packets from the powerline.
UPB Transmitter
The WS1D has UPB Transmitter Logic capable of transmitting UPB Communication Packets onto the powerline.
UPB Core Logic
The WS1D conforms to the UPB System Model as defined in the UPB System Description document. The WS1D has UPB Core Logic capable of responding to the UPB Core Command Message Set as described in the UPB System Description document.
LED Indicator
The WS1D has a bi-color LED indicator used to indicate its current status and mode of operation.
Slave Switch
The WS1D has a special input (wire) for connecting an optional Slave Switch, which can be used to control the WS1D in a similar fashion to the WS1D's local Rocker Switch
WS1D Connections
The WS1D shall have four wires that are used to connect it to power, load, and an optional slave switch.
- Max Total Load: 600W.
- Min Load: 60W.
- 200 dimming steps.
|
|
Product Accessories
|
|
|
|
|
|
|
|
|
|
|
Why Automate
