MONTERREY POWERLINE SIGNAL ANALYZER

FIVE TOOLS IN ONE!

The Powerline Signal Analyzer has five modes of operation.

• MODE 1 - X10 Signal Identifier and Signal Strength Indicator

• MODE 2 - Displaying AC Power Line Noise

• MODE 3 - Dissecting X10 Codes

• MODES 4 & 5 - X10 History Recorder

If during recording one has switched to another mode, pressing the mode button 4 times will continue the recording session from the point of the last recording without clearing or resetting any previously recorded events. If the power fails during a recording session, recording will continue upon restoration of power from where it left off except the internal timer will now be reset to 00.0.

From any mode except MODE 3 (Signal Dissect), pressing the NEXT or the BACK button on the front panel will display the total number of recorded X10 events on the top line, and the last recorded event on the bottom.

IDEAL TOOL FOR THE SERIOUS X10 INSTALLER!

Designed by a professional installer and X10 technical expert, the Power Line Signal Analyzer is the only tool of its kind and will pay for itself within your first few troubleshooting assignments.

If you are a serious installer of X10 components, this tool can prove invaluable. Nothing else compares.

Check out these additional products:

ELK X10 Signal Meter
X10 Test Set (Transmitter and Receiver)

Monterrey Powerline Signal Analyzer Codes - Detailed (.pdf)

• Dimensions: 4.5" W x 2.5" H x 1" D
  
• Two-line LCD display with contrast adjustment
  
• 120VAC, 60 HZ device; 6-foot cord with polarized plug
  
• Fuse protected; 2 AG, .5 Amp