Optex Outdoor Dual Beam Photoelectric Detector, 100'
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
Details
Short-Range Detector for Any Outdoor Environment
Monitor outdoor perimeters without setting off false alarms by installing the Optex Outdoor Dual Beam Photoelectric Detector (100 Ft.). With a beam transmitter and a beam receiver, this complete dual beam detector set offers an optimized optical pitch design to prevent flying birds, falling leaves, etc. from triggering an alarm. It also features four selectable beam frequencies to help you avoid crosstalk when using multiple beam detection systems.
- Waterproof IP65 housing with anti-frost hood cover
- Four selectable beam frequencies
- Adjustable beam interruption time
- 99 percent beam blocking stability
- Suitable for beam stacking applications
Durable Construction Withstands Harsh Environments
The Outdoor Dual Beam Photoelectric Detector is rated IP65 to withstand even the most severe outdoor elements. Sturdy housing keeps out dust, bugs, and water, while an anti-frost hood cover helps maintain functionality in low temperatures. Both the transmitter and receiver also have built-in lightning and surge protection. The system even has a unique environmental disqualification circuit that sends a trouble signal if the beam is significantly interrupted by heavy rain, fog, etc.
Installation Details
The transmitter and receiver can be mounted on separate poles or walls up to 100 feet away from each other. Mounting hardware is included. The system wires into your alarm system to provide alerts.
Contents
- Transmitter
- Receiver
- (4) Pole Brackets
- (8) Mounting Plate Lock Screws
- (8) Pole Lock Screws
- (4) Wall Mounting Screws
Optex – The Quality Products People Expect
Optex, Inc. markets products manufactured by Optex Company Limited. The company specializes in passive and active infrared technology, control systems, and CCTV products. Since its founding in 1979, Optex has established a worldwide reputation for quality, innovation, and technical excellence. Its products always represent an investment in performance and long-term satisfaction.
Specifications
Product Features
- IP65 structure with high sealing rubber packing: Rubber packing is used for all conceivable points where water or dust may penetrate, such as wiring holes, wire ports and the outer chassis. Prevention from dust, bugs and water delivers performance with higher reliability against false alarms and breakdowns.
- Anti-frost hood cover: A hood is installed to prevent frost forming on lower beams. It also makes the maintenance easy because the surface of the cover is flat.
- Lightning protection: An improved Electromagnetic Interference surge absorber and high surge resistive relay has been installed and maintain stable operation.
- Easy angle adjustment: It allows the installer to finely adjust the beam easily. [Horizontally ±90° with hand] [Vertically ±5° with screwdriver]
- High grade spherical lens: The high grade spherical lens creates more sharply defined and precise infrared beams compared to ordinary fresnel lenses.
- A.G.C. (Automatic Gain Control) circuit: A.G.C. circuit continually monitors for gradual changes in the signal’s strength caused by changing weather conditions. It adjusts the sensitivity accordingly to maintain the proper signal level for the current environmental conditions.
- 99% beam blocking stability: Enables stable operation with as much as 99 percent loss of beam energy caused by heavy rain, dust storms, fog or snow.
- Adjustable beam interruption period: The beam interruption time can be adjusted to fit any application. For example, when protecting catch intruders.
- D.Q. Circuit: D.Q. circuit (environmental disqualification) sends a trouble signal when the beam strength is below an acceptable level due to heavy fog, rain, snow or other changes in the installation site. The trouble signal output continues as long as the beam strength is below an acceptable level.
- 4-step alarm indicator LED: The alignment condition is visually displayed on the LED. It shows the alignment condition by using 4 different process to achieve accurate and easy alignment before fine tuning.
Technical Details
- Manufacturer Part #: AX-100TF
- Detection Method: Infrared beam interruption detection
- Maximum Detection Range: 100 feet (30m)
- Maximum Arrival Range: 1,000 feet (300m)
- Interruption Period: Selectable between 50, 100, 250, and 500m seconds
- Selectable Beam Frequency: 4 channel
- Power Supply: 10.5 – 28V DC
- Current Consumption (transmitter + receiver): 44mA (max.)
- Alarm Period: 2 seconds (±1) nominal
- Alarm Output: N.C./N.O. 28V DC, 0.2A (max.)
- D.Q. Output: N.C. 28V DC, 0.2A (max.)
- Tamper Switch: Opens when cover is removed at 28V DC, 0.2A max.
- Operating Temperature: -31° to 140° F (-35° to 60° C); Use the optional heating unit (HU-3) in conditions of -13° F (-25° C) or below.
- Operating Humidity: 95 percent max.
- Alignment Angle: ± 90° Horizontal, ± 5° Vertical
- Mounting: Wall and pole mounting
- Weight (transmitter + receiver): 24.7 ounces (700g)
- Housing Protection (EN 00529): IP65
- Dimensions: 6.7(H) x 2.6(W) x 2.7(D) inches (170 x 65 x 69.5 mm)