|
|
|
NuTone Multiport Inline Ventilation System
NUMP280
Operating at 290 CFM the NUMP280 is capable of ventilating multiple problem rooms (bathrooms, laundry rooms, etc.) simultaneously. Constructed with four...
Price: $384.95
|
|
 Product Description
|
NUTONE MULTIPORT INLINE VENTILATION SYSTEM
290 CFM VENTILATOR WITH FOUR 4" INLETS
Operating at 290 CFM the NUMP280 is capable of ventilating multiple problem rooms (bathrooms, laundry rooms, etc.) simultaneously. Constructed with four 4" inlets (each of which capable of handling extended duct runs) and motors designed for continuous operation, this ventilator is capable of distributing air from multiple sources throughout your home.
ELIMINATE INDOOR POLLUTION
With indoor air pollution causing various problems, having fresh, clean air should be a priority for everyone. With a properly installed continuous ventilation system, contaminants are removed with a quiet bathroom fan/ducted kitchen range hood. Then contaminants are diluted with a whole-house continuous ventilation system, preventing the contaminants of dissipating throughout your whole home. The constant exchange of stale air with fresh air that a ventilation system provides creates a healthier, more comfortable home. |
Specifications
|
|
NuTone Multiport Inline Ventilation System Installation Guide (.pdf)
NuTone Multiport Inline Ventilation System Specification Sheet (.pdf)
FEATURES:
Blower - High pressure, centrifugal blowers accommodate many ducting configurations
- Motors designed for continuous operation
- Permanently-lubricated motors assure worry-free operation
- Permanent Split Capacitor (PSC) motors are used for quiet operation and low power consumption
- Plug-in motor rated at 120 VAC, 60 HZ operation
- HVI certified to assure consistent operating performance
Housing
- Rugged 20 gage steel housing finished with electrically bonded epoxy paint
- May be installed in virtually any orientation - ceiling, wall or floor
- In-line installation assures quiet operation
- Easily removable panel permits quick access to blower for cleaning and servicing without disturbing ductwork
- (4) 4" round inlets and 6" round outlet for easy duct connections
- All wiring and ductwork can be connected from the outside of the housing - no need to remove access panel or blower.
SPECIFICATIONS:
- 290 CFM, 3.0 Sones.
- Can be installed in virtually any orientation.
- 6" round outlet; 4" round inlets.
- Use 2, 3 or all 4 inlet ports.
- Two inlet duct covers furnished.
- Plug-in blower simplifies service.
- Air performance is HVI certified and AMCA licensed.
|
|
|
|
|
|
|
|
Why Automate
