NAPCO FIREWOLF CARBON MONIXIDE DETECTOR

FALSE-ALARM-FREE CO DETECTOR TECHNOLOGY

This CO alarm is suited for residences, motels, hotels, and commercial or industrial system applications. The NPFWCO12 is designed for 4-6 wire connection to 12VDC alarm system control panels. Reference: UL Listed Household Fire and/or Burglary Panel with auxiliary signaling zones. Connect to signaling zones which can be designated for CO alarm use only.

Features:

• The first commercially available gas sensor that uses patented biometric technology to simulate CO gas level response in the human blood stream for immunity to false alarms from common household gases
  
• Independent lab tests prove superior false alarm immunity over electrochemical units (*Berkeley National Laboratory, report #40566)
  
• Powerful 85db alarm sounder & LED
  
• Solid state electronics, won't leak or dry up; not subject to orientation problems of other detectors
  
• Smart microprocessor and infrared sensor optimize life safety & detection accuracy
  
• Active self test and LED indicator
  
• Minimal current draw by incorporating infrared monitoring sensor: 20 ua (microamps) standby. 60mA alarm 30mA trouble
  
• Form C alarm & trouble relays
  
• Convenient wall or ceiling mount (includes hardware)

• Sensitivity Setting: Unit will alarm at 150 ppm CO within 50 minutes.
  
• Power:12VDC nominal, operating voltage range 10-15 Vdc
  
• Current Draw: Standby 20 microAmp. Alarm 60 mA, max.Trouble 30 mA.
  
• Field Wiring:14-22 AWG
  
• Alarm and Trouble Signal Relays Non-Latching
  
• Contact ratings: Form"C", 1A – 30Vdc
  
• Operating Temperature: 4.4° C – 37.8° C (40° F - 100° F)
  
• Operating Humidity: 15-95% RH
  
• Horn (Sounder) Loudness: 85 db @ 10 ft(3.3 meters)
  
• Compliance: UL2075 Listed. Tested to meet UL2034 CO response requirement