NAPCO ALARM LOCK WEATHERPROOF DIGITAL ACCESS KEYPAD

CAN TRIGGER A DOOR STRIKE, AN ELECTROMAGNETIC DOOR LOCK, AND MORE!

Get the convenience of 2000 user codes and audit trail from fingertip or PC-programmable digital keypads. With the PDK3000, you receive a superior product that is easy to install in minutes. Wall mount or single gang box, the PDK3000 are designed to withstand extreme weather conditions from –31˚ to 151˚F (-35˚ to 66˚C). What's more is its sleek all metal 12-button keypad design and vandal-resistant technology, which makes the PDK3000 ideal for all business locations.

This user-friendly keypad can be programmed with 40,000 event audit trail reporting. Simply download data onto the DTMIII Data Transfer Module and connect the device to your PC or handheld printer. Other features of the Trilogy PDK3000 are its 2 high-current rated 8A relays for entry, alarm zone shunting or lock release by real-time schedule. Selectable door open times 5, 10 or 15 seconds plus DK3000's remote release feature and request-to-exit input place it in a class of its own. A built-in HID proximity reader accepts up to 2000 PIN codes and/or HID cards and keyfobs for extra security.

Instead of a lock, the PDK3000 keypad operates main and auxiliary relays, and can be used to trigger a door strike, an electromagnetic door lock, or any other relay-activated device. Programming may be performed manually from the keypad, or from a PC using Alarm Lock's DLWindows Software.

Note: The PDK3000 is not a complete lock system, and should be thought of as a lock controlling device. The PDK3000's primary/entry and auxiliary relay can be used to activate or deactivate a door strike or a door magnet locking device. In a typical application, the PDK3000 will energize its Primary/Entry relay upon the keypad entry of a valid user code. The relays used in the PDK3000 are of the three contact Form C type, containing a Common, Normally Closed, and a Normally Open contact. In addition, the PDK3000 does not use an on-board battery supply, but is supplied with an externally wired AC/DC power source.

Available In Duranodic and Polished Brass.

ABOUT NAPCO ALARM LOCK SYSTEMS, INC.

For more than three decades Alarm Lock Systems, Inc. has built a strong reputation as a respected leader in the design and manufacture of electronic and mechanical access and egress control products. Alarm Lock's wide range of electronic access locks has pushed all the right security buttons for security directors, business owners, and facility managers, who know that Alarm Lock's keyless access dependably promises time-automated security and a wealth of management information. Meanwhile, Alarm Lock's door alarms and panic exit hardware devices remain a security industry staple. Alarm Lock Systems, Inc., is a Napco Security Group Company.

Digital Access Keypad Programming Instructions (.pdf)
Digital Access Keypad Installation Instructions (.pdf)

• Wall mount : Single gang box mounting.
  
• Wiring: Unit provides flying leads for power, relays, tamper and remote Release.
  
• I/O Specs: 2 form C relays 5AMP minimum contact rating. Red & green LED Indicators. 1 remote release input. Sounder and tamper.
  
• Power: Operating voltage 12-24VDC selectable. Cutting 2 insulated wire loops provides 12V operation. Power supply not included.