AIRVAC RED SERIES BAGLESS CENTRAL VACUUM MOTOR
BAGLESS CENTRAL VACUUM SYSTEM FOR HOMES UP TO 12,000 SQ. FT.
The AirVac Red Series Bagless Central Vacuum System is a bagless central vacuum power unit. The Bagless Central Vacuum System is modular in design with nested components that reduce storage space and shipping costs. The nested design also simplifies handling, installation and service.
For installation flexibility, both the intake and exhaust ports can be connected from the left or right side. A front-mounted utility port allows easy connection of a hose directly to the power unit for local cleaning. The vacuum’s control panel has a power switch and power indicator.
The power unit’s permanent fabric filter provides filtration down to .1 micron diameter. The debris bucket on the bottom of the power unit holds up to 6 gallons of dust and dirt. Two easy-to-access swing-down latches secure the debris bucket and are used to remove the debris bucket for emptying.
The central vacuum system’s power is controlled through a low-voltage wire that connects to each wall inlet valve. When a central vacuum hose is inserted into the wall inlet valve, two sensing pins in the valve connect to the trigger ring on the hose end. Some hoses have a solid trigger ring that electrically connects the valve’s sensing pins whenever the hose is inserted into the valve, which starts the vacuum. Other hoses have a split trigger ring that’s connected to a low-voltage control switch in the hose’s handle, allowing the operator to control the vacuum unit’s power.
A foam-filled muffler is included for installation in the exhaust system piping. The muffler substantially reduces operating noise. Routing the vacuum’s exhaust through piping to outside the residence assures all remaining dust vents outside of the building.
The Red Series Bagless Central Vacuum System comes in the following 4 versions:
- The AVR3000 is 2-stage, 120V and has 537 peak air watt capacity. It can be installed in homes up to 3,000 square feet.
- The AVR7500 is 2-stage, 120V and has 551 peak air watt capacity. It can be installed in homes up to 7,500 square feet.
- The AVR12000 is 2-stage, 120V and has 570 peak air watt capacity. It can be installed in homes up to 12,000 square feet.
- The AVR24000 is 2-stage, 240V and has 627 peak air watt capacity. It can be installed in homes up to 12,000 square feet.
WHY AIRVAC?
Because the best part of an AirVac central vacuum system is what it doesn’t have: noise, inconvenience, and dust. Much less dust left behind - in your rugs, on your furniture, in the air and in your family’s lungs. Traditional vacuum cleaners allow too much dust to recirculate - on your rugs, on your furniture, throughout your home. The result: indoor air pollutant levels two to five times - and in some cases 100 times higher - than outdoor levels.
AirVac Central Vacuum Systems previously manufactured by M&S Systems are now manufactured by Linear LLC. M&S Systems has been an industry leader in the design and manufacture of built-in, electronic home amenities for over 50 years. |
