AIRVAC PLATINUM SERIES BAGGED CENTRAL VACUUM SYSTEM
BAGGED CENTRAL VACUUM SYSTEM FOR HOMES UP TO 12,000 SQ. FT.
The AirVac Platinum Series Disposable Bag Central Vacuum System is a disposable bag central vacuum power unit. It is modular in design with nested components that reduce storage space and shipping costs. The nested design also simplifies handling, installation and service.
For installation flexibility, both the intake and exhaust ports can be connected from the left or right side. A front-mounted utility port allows easy connection of a hose directly to the power unit for local cleaning. The vacuum’s control panel has a power switch, four-color bag debris level display, two-color service indicator, and a service reset button.
The power unit’s permanent fabric filter provides filtration down to .1 micron diameter. The slide-gate collar dust bag mounts inside the debris bucket on the bottom of the power unit and holds up to 5.2 gallons of dust and dirt. Two easy-to-access swing-down latches secure the debris bucket and are used to access the dust bag. When its time for bag replacement, the slide-gate collar on the bag closes to keep the dust and dirt sealed inside.
The central vacuum system’s power is controlled through a low-voltage wire that connects to each wall inlet valve. When a central vacuum hose is inserted into the wall inlet valve, two sensing pins in the valve connect to the trigger ring on the hose end. Some hoses have a solid trigger ring that electrically connects the valve’s sensing pins whenever the hose is inserted into the valve, which starts the vacuum. Other hoses have a split trigger ring that’s connected to a low-voltage control switch in the hose’s handle, allowing the operator to control the vacuum unit’s power.
A foam-filled muffler is included for installation in the exhaust system piping. The muffler substantially reduces operating noise. Routing the vacuum’s exhaust through piping to outside the residence assures all remaining dust vents outside of the building.
The Platinum Series Bagged Central Vacuum System comes in the following 4 versions:
- The AVP3000 is 2-stage, 120V and has 537 peak air watt capacity. It can be installed in homes up to 3,000 square feet.
- The AVP7500 is 2-stage, 120V and has 551 peak air watt capacity. It can be installed in homes up to 7,500 square feet.
- The AVP12000 is 2-stage, 120V and has 570 peak air watt capacity. It can be installed in homes up to 12,000 square feet.
- The AVP24000 is 2-stage, 240V and has 627 peak air watt capacity. It can be installed in homes up to 12,000 square feet.
CENTRAL VACUUM SOLUTION
For more than 50 years, homeowners have relied upon AirVac to do their dirty work. Now part of the Linear family, AirVac removes dust from their rugs, furniture and drapes, and it does this with incredible efficiency. With a little planning, it’s easy to install an AirVac system in new or existing homes. The PVC tubing can run through the attic, basement or cold air returns, then lowered or raised behind interior walls to inlet valves that are installed in strategic locations throughout the house (usually about one inlet for every 600 square feet). The central power unit is located in an out-of-the-way area such as a garage, basement or utility room, keeping the living areas quiet, clean and dust free.