LINEAR AIRVAC HIGH-VOLTAGE WALL INLET VALVE ROUGH-IN KIT DESIGNED FOR NEW CONSTRUCTION INSTALLATIONS The Linear High-voltage Wall Inlet Valve Rough-in Kit (Model VM612) contains a plastic valve bracket with a metal mounting flange, high-voltage wire with connector, and a Model VM196-75 Valve Bracket Plaster Guard. The kit is designed for use in new construction. The bracket mounts to a wall stud. The central vacuum system’s PVC riser pipe connects to the back side of the bracket. A high-voltage wall inlet valve slides into the front side of the bracket and is secured to the bracket with two screws. Included is a 12-gauge, 6-foot, high-voltage cable with a wall inlet valve electrical connector. This cable wires to a 120 VAC source and supplies power to electric-driven central vacuum power heads. The connector snaps into the wall inlet valve’s wall plate. The Model V610PS Deluxe SuperSystem Central Vacuum Hose plugs into the electrical connector when the hose is inserted into the wall inlet valve. The VM612 High-voltage Wall Inlet Valve Rough-in Kit is compatible with all colors of Model VMVP High-voltage Wall Inlet Valves, and Model VMVPL Lighted High-voltage Wall Inlet Valves. WHY AIRVAC? Because the best part of an AirVac central vacuum system is what it doesn't have: noise, inconvenience, dust. Much less dust left behind - in your rugs, on your furniture, in the air and in your family's lungs. Traditional vacuum cleaners allow too much dust to recirculate - on your rugs, on your furniture, throughout your home. The result: indoor air pollutant levels two to five times - and in some cases 100 times higher - than outdoor levels. AirVac Central Vacuum Systems previously manufactured by M&S Systems are now manufactured by Linear LLC. M&S Systems has been an industry leader in the design and manufacture of built-in, electronic home amenities for over 50 years. |
