Leviton SmartLockPRO Duplex GFCI Receptacle, Hospital Grade, Gray
LV7599HGG

The Leviton SmartLockPRO Duplex GFCI Receptacle is Hospital Grade. The GFCI is automatically tested every time the...

Price: $24.95

LEVITON SMARTLOCK PRO DUPLEX GFCI RECEPTACLE, HOSPITAL GRADE, GRAY

AUTOMATICALLY TESTS THE GFCI WHEN THE RESET BUTTON IS PUSHED

The Leviton SmartLockPRO Duplex GFCI Receptacle is Hospital Grade. The GFCI is automatically tested every time the RESET button is pushed in. The GFCI will not reset if the GFCI circuit in not functioning properly. By blocking reset of the GFCI if protection has been compromised, SmartLockPRO reduces the possibility of end-users incorrectly assuming that a reset GFCI outlet is providing ground fault protection when it actually is not. Compatible with all Decora devices and wallplates (not included).

LEVITON SMARTLOCK PRO

Leviton's SmartLockPRO™ GFCI raises the bar for electrical safety and complies with UL's latest GFCI requirements which go into effect today. Based on the patented lock-out feature of Leviton's original SmartLock® GFCI, the SmartLockPRO offers two-stage protection against ground fault shock hazard, adding enhanced electrical safety features.

As part of its two-stage protection feature, the SmartLockPRO cannot be reset when its line and load terminals are mis-wired. In instances of an improperly wired line-load reversal, the green diagnostic LED indicator will turn ON to signal the wiring error. Once the device is properly re-wired it can be reset and its LED will function as a power indicator light, signaling that power is available at the receptacle.

A second stage of protection is afforded during the GFCI's service life. If the device fails to work properly (i.e., stops providing ground fault protection) at any time after it is installed, it cannot be reset. This provides a clear indication to users that the device must be replaced.

Features

• Automatically test the GFCI every time the RESET button is pushed in. The GFCI will not reset if the GFCI circuit in not functioning properly.
• By blocking reset of the GFCI if protection has been compromised, SmartLockPRO reduces the possibility of end-users incorrectly assuming that a reset GFCI outlet is providing ground fault protection when it actually is not.
• A line-load reversal diagnostic feature is provided which prevents the GFCI from being reset and stops power from being fed to the GFCI receptacle face or through to downstream devices. A green LED indicator on the GFCI's face also illuminate4s to alert the installer to the line-load wiring reversal.
• The trip latch mechanism in SmartLockPro GFCIs is a one piece "T" design for efficient operation
• There are 4 sets of contacts for load terminals and face. SmartLockPRO GFCIs use a patented bifurcated bridge contact for efficient operation
• Trip threshold meets or exceeds UL requirements for tripping time
• Improved immunity to high-frequency noise reduces nuisance tripping
• Advanced electronics design provides superior resistance to electrical surges and over-voltages
• Expanded wiring options with nine back-wire holes 9two for each line and load connection plus one for ground with an internal clamp)
• Silver alloy contacts
• Compatible with all Decora devices and wallplates (not included)

Specifications

• Grounding: GFCI Ground Fault
• Feature: SmartLockPRO Buttons Match Face
• Amperage: 15 Amp
• Voltage: 125 Volt
• NEMA: 5-15R
• Pole: 2
• Wire: 3
• Termination: Back & Side 20A Feed-Thru
• Face Material: Nylon
• Body Material: Nylon
• Strap Material: Steel
• Color: Gray
• Standards and Certifications: UL/CSA
• Diagnostics: w/ Indicator Light