Leviton Humidity Sensor & Fan Wall Controller
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
Details
Control Humidity With Automatic Ventilation
Save energy while keeping condensation to a minimum by connecting the Leviton Humidity Sensor and Fan Control to your ventilation fan. When the sensor detects excess humidity, it triggers the fan to automatically turn on, helping you prevent mold and mildew. When moisture has been adequately removed from the air, the Humidity Sensor and Fan Control will turn your fan off. It's perfect for efficiently controlling moisture levels in bathrooms, basements, spas, and other rooms prone to excess humidity.
- Turns on fan when excess humidity is detected
- Pushbutton control for immediate ventilation
- Adjustable air sensitivity to prevent false tripping
- Meets CALGREEN requirements for Indoor Air Quality and Exhaust
- Installs in a standard wall box
Customize Moisture-Activated Ventilation
Two dials located under the face of the Control allow customization for the perfect ventilation setup. One dial controls the built-in timer, which allows you to set the ventilation fan's "minimum ON time" according to 10, 20, 30 or 45-minute intervals. If you set the timer to 20-minute intervals, for example, the sensor will operate the fan when activated either for 20 minutes or until humidity levels are sufficiently reduced (whichever comes first).
Automate Periodic Ventilation
You can use the Control's second dial to choose between different two operating modes: 1) standard humidity control or 2) Air Cycle Mode. When you put the Control in Air Cycle Mode, the fan automatically turns on every hour for a set period of time, whether or not humidity is detected. For example, the fan can be programmed to turn on for 20 minutes and turn off for 40 minutes every hour.
Save Energy, Reduce Costs
Designed to help you save energy, the Control features a sensitivity level adjustment that allows you to adjust the sensor's sensitivity to humidity. Lowering sensitivity can help prevent false activation from insignificant levels of humidity, such as the steam created by running a hot faucet for a few minutes.
Installation Details
The Humidity Sensor and Fan Control fits in a standard wall box and can easily replace an existing single-pole switch. It requires a neutral connection for operation, and a single-gang wallplate for a professional, clean appearance.
NOTE: Wallplate not included. Requires a ventilation fan (not included).
About Leviton
Leviton is the smart choice, providing the most comprehensive range of solutions to meet the needs of today's residential, commercial and industrial buildings. Leveraging more than a century of experience, Leviton helps customers create sustainable, intelligent environments through its electrical wiring devices, network and data center connectivity solutions, and lighting energy management systems. From switches and receptacles, to daylight harvesting controls, networking systems, and equipment for charging electric vehicles, Leviton solutions help customers achieve savings in energy, time and cost, all while enhancing safety.
Specifications
- Time Adjustment: 10 to 45 minutes
- Neutral: Required
- Load Rating:
- Single Pole: 120VAC, 60Hz
- Incandescent: 600W
- LED/CFL: 150W
- Fan: 1/6 HP (3A)
- Inductive/Ballast: 400VA
- Voltage: 120 VAC, 60 Hz
- Switch Type: Single-Pole
- Adjustment: Manual
- Agency Standards and Compliance: cULus; Standards UL 873 and C22.2 No. 24; File No. E79658; CALGREEN and CA Title 24 Compliant
- Warranty: 5-Year Limited