LEVITON DHC DIMMING SWITCH, 4 ADDRESS

BEAUTIFUL IN-WALL CONTROLLERS!!

The Leviton DHC 4 Address Dimming Switch controls Leviton's DHC devices as well as any other manufacturer's X-10 protocol compliant devices. This dimming switch utilizes existing 60Hz 120V AC house wiring for "No New Wires" installation, when neutral wire is present in existing boxes. It also utilizes Leviton's patented Intellisense Technology for advanced signal/noise discrimination. Green LED's illuminate to indicate that an ON command has been sent or a STATUS ON report has been received. The DHC Dimming Switch may be used to control lights and loads remotely and is compatible with Decora screwless and Decora standard designer wallplates.

NOTE: This Device Does NOT Control a Load

COMPLETE SCENE SOLUTIONS WITH LEVITON DHC

Leviton's Decora Home Controls (DHC) Residential Powerline Carrier components provide homeowners with everything needed for programmed and manual control of lighting and appliances using their home's existing AC wiring.

Leviton's DHC components features new programmers, controllers and receivers with Scene Lighting Capability for coordinated, whole-house lighting control. Many new DHC components feature IntellisenseÖ, a Leviton exclusive technology which results in the most reliable performance of any powerline carrier home automation system available today.

Leviton DHC 4 Address Dimming Switch Instruction Sheet (.pdf)

Features:

• Device Type: Dimming Switch
  
• Line Type: Green
  
• Number of Addresses: 4
  
• Communication: 2-Way
  
• Operation: ON/OFF, GROUP DIM/BRIGHT, ALL ON/ALL OFF
  
• Voltage Rating: 120 Volt AC 60Hz
  
• X-10 Protocol Compliant: Yes
  
• Wallplate: Order Separately
  
• Color: White
  
• Standards and Certifications: UL/CSA