|
|
|
|
HomeSeer Z-Wave Multi-Sensor
HSHSM100S2
|
|
|
|
|
|
 |
 Product Description
|
HOMESEER Z-WAVE MULTI-SENSOR
NEEDS NO WIRES TO OPERATE!
The HomeSeer Z-Wave Multi-Sensor is a device featuring three-sensors-in-one! The HSM100 is primarily intended and supported as a motion sensor by all Z-Wave certified systems though it can also function as a temperature and light sensor when used with any HomeSeer system! Use it to control Z-Wave devices directly or to trigger HomeSeer automation events for whole house control of Z-Wave and non Z-Wave automation products. The HSM100 is battery powered and needs no wires to operate. HSM100 can be wall mounted or simply placed on any flat surface. Battery lifetime typically exceeds one year but depends on the operating modes programmed.
Motion Sensor: The sensitivity of the HSM100 motion sensor is fully adjustable, allowing pet owners to tweak the unit for best performance without false positives. The unit has a range of 30 feet and a sensor angle view of 90° (horizontal). For best performance, mount the unit flush against a wall at a height of 6-8 feet. It is not necessary to point the unit downward. An exposed side-mounted button allows for easy unit testing and setup and the default setup cycle (10 min's) provides HomeSeer users and installers plenty of time to configure the unit.
Illumination Sensor (Requires HomeSeer System): The illumination sensor of HSM100 can be programmed to work in tandem with HomeSeer software and controllers to ensure greater lighting accuracy under a wide variety of conditions. Use it to light rooms before 'sunset' on cloudy or overcast days. Use it to prevent 'on' commands when sufficient natural light is already available.
Temperature Sensor (Requires HomeSeer System): The temperature sensor of HSM100 can be used to adjust heating and cooling systems to keep the room comfortable. Use it also to monitor areas of concern where conventional thermostats are not installed.
Battery Level: In addition to sensing motion, light and temperature, the HSM100 also monitors its own battery condition. Use this feature with HomeSeer to trigger email, phone or text to speech alerts if the battery drops below a certain (user definable) point.
HOME AUTOMATION FOR YOUR LIFE AND FAMILY
HomeSeer can be used to monitor and control lighting, appliances, climate, security, telephones, irrigation, window shades and home entertainment equipment. Then mix and match any combination of interfaces you like to suit the needs of your family. Control the system with your choice of in-wall button controllers, touchscreens, wireless remotes, microphones, PDAs, PocketPCs, telephones (voice and touch-tone control) and personal computers.
All HomeSeer home automation systems are web-enabled to allow access to your home while you're away at work or on vacation. Easily keep tabs on your home and family using any web browser from anywhere. Receive emails or calls when things happen at home or people come and go.
Now, with HomeSeer home automation, you can finally have the peace of mind that comes from knowing your family is safe and secure and your home is operating at peak efficiency!
|
|
Home Seer Z-Wave Z-Wave Multi-Sensor Installation Guide (.pdf) Motion Sensor: - Passive Infrared Sensor (PIR)
- 30 ft Range
- 90° Horizontal Angle Coverage
- Adjustable Sensitivity (for pet friendly operation)
- Programmable Timeout (for no motion detection)
- LED Motion Indicator
Illumination Sensor - Detects the amount of light in the room
- Lights stay off if there is sufficient natural light
Temperature Sensor - 32° - 104°F (0° - 40°C) Range
- 0.2°F Resolution
Z-Wave Wireless RF Communication - Advanced Mesh Network Protocol
- Includes 300 series Z-Wave chip
- 300 ft Range
- 40,000 bits/sec
- Adjustable WakeUp Notification
- Up to 4 Associated Z-Wave Nodes
General - Two-piece wall mount enclosure or can be placed on a flat surface
- Battery Powered (3 AAA)
- 1 Year Battery Life
|
|
|
|
|
|
|
|
