* ACTUAL RETAIL PRICE TOO LOW TO PUBLISH! |
Call Home Controls For Your DISCOUNT – 800-266-8765 (Toll Free In The U.S.) |
HAI OMNITOUCH 5.7 TOUCHSCREEN HUB & POWER SUPPLY
WITH VIDEO ENCODER IN ENCLOSURE
The HAI Touchscreen Hub is used to provide power, communications and a video signal to HAI OmniTouch touchscreens. Up to eight OmniTouch touchscreens, with or without video, can be connected; however, you may connect an additional Touchscreen Hub for a total of up to 16 OmniTouch touchscreens when used with an HAI OmniPro II or HAI Lumina Pro controller. The Touchscreen Hub is required for connecting OmniTouch with Video touchscreens.
The Touchscreen Hub is provided in an HAI enclosure (same as Omni IIe and OmniPro II).
The HAI Touchscreen Hub provides battery backed power for HAI OmniTouch touchscreens, cameras (optional), and the HAI Video Encoder. It has convenient connections and power terminals for a neat installation. It also has six individual camera inputs, which can be selected by the HAI OmniTouch Touchscreen with Video for viewing. Six individual camera outputs allow the cameras to be connected to a second HAI Touchscreen Hub with Video Encoder, HAI Web-Link II for viewing on a monitor or handheld device, HAI Home Control for Windows Media Center for viewing and recording, and/or directly to television sets, video recorders, etc.
The HAI Touchscreen Hub was designed to eliminate unsightly transformers, power strips, external power supplies, battery backup units, and complex wiring normally associated with camera and touchscreen installations. In addition to simplifying the installation, the HAI Touchscreen Hub automatically sequences the startup of touchscreens and has a low voltage cut out feature for long-term reliability and zero maintenance.
- Connections for 8 Touchscreens: Cat 5 (RJ-45) for OmniTouch with Video, 4 conductor for OmniTouch
- Inputs from 6 NTSC Composite color or b/w cameras
- Pass-through outputs for 6 cameras to TV, modulator, media center, other displays, etc.
- Power supply with battery back up for Touchscreens (24 V at XX A)
- Power supply with battery back up for cameras (12 V at 1.5 A)
- Connections for all Omni family and Lumina family home control systems (console bus and ground, 3 wires)
- Supports Video Encoder – (mounts on Hub circuit board), required to use video on an OmniTouch 5.7 or OmniTouch with Video Touchscreen.
- Supervisory output can be connected to Omni zone to indicate low battery
- Connectors for two sealed batteries, 12 V at 4 to 8 amp-hours each (not supplied)
- Supplied with Universal Switching Power Pack, 100-240 VAC, 50/60 Hz.
Video Encoder
With the Video Encoder added to the Touchscreen Hub, an OmniTouch 5.7 gains full VGA support. Video signals from cameras are higher definition, providing advanced image quality for surveillance.
- No programming necessary – plug-and-play
- Simple installation
- Upgrades display of camera video to VGA
- Select Mode, QVGA @ 5-7FPS; Fullscreen, VGA @ 2-3FPS
- Backwards-compatible with older OmniTouch 5.7 models
- Powered by the Touchscreen Hub
- Required for OmniTouch 5.7 video display capability
The HAI Video Encoder renders VGA video output. Power is provided by the Touchscreen Hub for reliable operation. Installation is easy and the results are both simple and practical. And there’s no worries about which generation OmniTouch 5.7 Touchscreen you might already have installed as this encoder is backwards-compatible with the older OmniTouch 5.7 models. The Video Encoder is required for the OmniTouch 5.7 to display video.
YOUR COMPLETE AUTOMATION SOLUTION WITH HAI OMNITOUCH
HAI designed the Hub to eliminate the unsightly and unreliable “wall wart” transformers, power strips, “Y” connectors, external power supplies, battery back up units and complex wiring normally associated with camera and Touchscreen installations. In addition to simplifying the installation, the power supply has low voltage cut out and automatically sequences the start up of Touchscreens for long term reliability and zero maintenance. The batteries are recharged automatically. |
