|
|
|
|
HAI Speaker/Microphone Module, Surface Mount
HA28A001
Price: $25.20
|
|
|
|
|
 Product Description
|
* Actual Retail Price TOO LOW to Publish!
Call Home Controls for your DISCOUNT!
1-800-266-8765 |
HAI SPEAKER/MICROPHONE MODULE, SURFACE MOUNT
TALK TO THE CENTRAL STATION AFTER AN ALARM
The Model HA28A001 is a speaker and microphone assembly that allows two-way communication with a central station after an alarm, paging and listening from an on-premises or remote phone, annunciation of alarm and zone by voice, and voice messaging (not available on all systems) when connected to a Two-Way Voice Module. It may be used outdoors in weather-protected areas.
Do not mount this speaker/microphone, the HA28A002 module, or HA33A004 consoles near any device that may produce noise (fans, air conditioning units, audio speakers, etc.). Microphones should be connected with 24 AWG or larger, shielded twisted pair wire. Wire length should not exceed 100 feet. Connect the cable shields and negative wires together at the Two-Way Voice Module (HA10A111), Rev B terminal block only. Do not connect the shield on the microphone end. Additional microphones can be connected to each input in parallel. Speakers should be connected with 18 AWG or larger, twisted pair wire. For wire runs that exceed 50 feet, use 16 AWG wire or larger. Wire length should not exceed 100 feet.
Requires Two-Way Voice Module (HA10A111).
Works with Lumina, Lumina Pro, Omni LT, Omni II, Omni IIe, or OmniPro II home control systems.
INTELLIGENT AUTOMATION SIMPLIFIED
An HAI automated home provides security, temperature, lighting, and audio control for comfort, convenience, and safety. The completed system can be accessed and controlled over the telephone or optionally over the internet.
|
|
HAI Surface Speaker/Microphone Module Manual (.pdf)
- Speaker Type: Polypropylene Weather Resistant
- Voice Coil: 8 Ohms
- Power Rating: 15 Watts
- Microphone: Electret Condenser, Omni-Directional
- Housing and Enclosure Material: UL-94 Flame Retardant Plastic
- Color: Decorator White
- Dimensions: 5 3/16" H x 5 3/16" W x 2 5/8" D
- Hardware: 14 Mounting Screws and 8 Wall Anchors
- Enclosure Knockouts: Knockouts for wire and plastic duct
|
|
Product Accessories
|
|
|
|
|
|
|
|
|
|
|
